Pomodoro timer
mithrasagar123-coder·pomodoro-timer
About the Pomodoro timer PCB
Pomodoro timer is an open source ESP32 PCB design by mithrasagar123-coder, published on GitHub. It is a 2-layer board measuring 70.1 × 62.4 mm, with 10 components from 6 distinct parts.
Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. By type, the board carries 4 switches, 2 capacitors, 2 resistors, 1 IC and 1 connector.
It belongs with the keyboards and displays & leds designs in this gallery.
From the project
Week 4 project for Half Life
I designed this for my Week 4 project of halflife, a 10-week program where you can design and build hardware projects free of cost!
(The character shown twice is Kanade Yoisaki from Project Sekai. The first image depicts her with her phone, representing break time, and the second image shows her intensely reading a book, representing focus time.)
View the entire thing at sketch_pomodorotimer.ino.
Main components on the Pomodoro timer
Pomodoro timer bill of materials (BOM)
10 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-C3-SMD | XIAO-ESP32-C6-DIP | U2 |
| 1 | Conn_01x04_Pin | Display_128x64_096_I2C | J1 |
| 4 | SW_Push | Kailh Choc Low-Profile Switches | SW1, SW2, SW3, SW4 |
| 1 | 100 nF | C_0805_2012Metric | C1 |
| 1 | 10µF | C_0805_2012Metric | C2 |
| 2 | 4.7 kΩ | R_0805_2012Metric | R1, R2 |
Pomodoro timer design files
The KiCad project lives in the mithrasagar123-coder/pomodoro-timer repository on GitHub; these links point at the commit this page was built from.
- Layoutoledscreen.kicad_pcb
- Schematicoledscreen.kicad_sch
- BOMBOM.csv
Pomodoro timer: common questions
What microcontroller does the Pomodoro timer use?
The Pomodoro timer is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.
How big is the Pomodoro timer PCB?
The Pomodoro timer measures 70.1 × 62.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pomodoro timer?
10 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Pomodoro timer design files?
From the mithrasagar123-coder/pomodoro-timer repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Pomodoro timer design in my own project?
The repository has no license, so all rights stay with mithrasagar123-coder. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Pomodoro timer without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k