LED Badge
mjbella·LED_Badge
About the LED Badge PCB
LED Badge is an open source STM32 PCB design by mjbella, published on GitHub. It is a 4-layer board measuring 165.1 × 76.2 mm, with 400 components from 27 distinct parts.
Its main chip is the STM32F407VGTx, from the STM32 family. Other key parts include the 74AHCT1G125, S-8252_(SOT23), MPU-6000, L7805 and MTCH105. By type, the board carries 200 diodes, 107 resistors, 68 capacitors, 11 connectors, 8 ICs and 2 transistors.
It belongs with the wearables and displays & leds designs in this gallery.
From the project
RGB LED Badge Prototype
This is a pcb badge with an MCU and tightly packed RGB LEDs (APA102).
Main components on the LED Badge
LED Badge bill of materials (BOM)
400 components, 27 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 74AHCT1G125 | SOT-553 | U1, U2 |
| 1 | S-8252_(SOT23) | SOT-23-6 | U3 |
| 1 | MPU-6000 | QFN-24_4x4mm_Pitch0.5mm_roundish | U4 |
| 1 | L7805 | TO-220-3_Horizontal | U5 |
| 1 | MTCH105 | TSSOP-14_4.4x5mm_Pitch0.65mm | U6 |
| 1 | STM32F407VGTx | LQFP-100_14x14mm_Pitch0.5mm | U7 |
| 1 | AZ1117-3.3 | SOT-223-3_TabPin2 | U8 |
| 2 | Q_NMOS_GDS | SOT-89-3 | Q1, Q2 |
| 1 | Crystal | Crystal_SMD_FOX_FE-2pin_7.5x5.0mm | Y1 |
| 2 | Conn_01x06 | Pin_Header_Straight_1x06_Pitch2.54mm_SMD_Pin1Left | J21, J24 |
| 1 | USB_OTG | USB_Micro-B_Molex-105017-0001 | J22 |
| 2 | Conn_01x02 | JST_PH_S2B-PH-SM4-TB_02x2.00mm_Angled | J23, J25 |
| 1 | GS3 | GS3 | J28 |
| 5 | TEST_1P | TESTPOINT-50MIL | J29, J30, J31, J32, J33 |
| 1 | POT | Potentiometer_Trimmer-EVM3S_R | RV1 |
| 1 | SW_Push | SW_SPST_B3SL-1002P | SW1 |
| 200 | APA102 | APA102-2020 | D1, D2, D3, D4, D5, D6, D7, D8 +192 |
| 1 | Ferrite_Bead | L_0805 | L1 |
| 34 | C | C_0603 | C1, C2, C3, C4, C5, C6, C7, C8 +26 |
| 28 | C | C_0805 | C35, C36, C38, C39, C41, C42, C43, C44 +20 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 6.8p | C_0805 | C55, C57 |
| 2 | CP | CP_Tantalum_Case-E_EIA-7260-38_Reflow | C58, C61 |
| 2 | CP | CP_Tantalum_Case-B_EIA-3528-21_Reflow | C64, C67 |
| 7 | R_Small | R_0805 | R1, R2, R6, R7, R8, R9, R15 |
| 1 | 10k | R_0805 | R3 |
| 96 | R | R_0805 | R4, R5, R10, R11, R12, R13, R14, R16 +88 |
| 3 | 0 | R_0805 | R28, R33, R59 |
LED Badge design files
The KiCad project lives in the mjbella/LED_Badge repository on GitHub; these links point at the commit this page was built from.
- Layoutledbadge.kicad_pcb
LED Badge: common questions
What microcontroller does the LED Badge use?
The LED Badge is built around the STM32F407VGTx, from the STM32 family.
How big is the LED Badge PCB?
The LED Badge measures 165.1 × 76.2 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the LED Badge?
400 components, from 27 distinct parts. The full bill of materials is listed on this page.
Where can I download the LED Badge design files?
From the mjbella/LED_Badge repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the LED Badge design in my own project?
The repository has no license, so all rights stay with mjbella. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the LED Badge without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k