Plant Buddy
mkhairyx·Plant_Buddy·Source/KiCad - PCB/Plant Buddy/Plant Buddy.kicad_pcb
About the Plant Buddy PCB
Plant Buddy is an open source ESP32 PCB design by mkhairyx, published on GitHub. It is a 2-layer board measuring 80 × 80 mm, with 37 components from 25 distinct parts.
Its main chip is the ESP32 DevKit, from the ESP32 family. Other key parts include the AMS1117-3.3, TLC555XD and PC817. By type, the board carries 12 capacitors, 10 resistors, 4 ICs, 3 connectors, 1 transistor and 1 switch.
It belongs with the power & battery and sensors designs in this gallery.
From the project
A device that waters your plant, checks the humidity of it's soil, powered by solar power, and detects when there's no source of water.
Whenever the ESP32 wakes up, it sends a status report to the user containing:
Current battery level Current soil moisture level Watering interval Reason for waking up

Main components on the Plant Buddy
Plant Buddy bill of materials (BOM)
37 components, 25 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | TLC555XD TLC555xD | SOP-8_3.76x4.96mm_P1.27mm | U2 |
| 1 | PC817 | DIP-4_W7.62mm | U3 |
| 1 | ~ | ESP32 DevKit | U4 |
| 1 | AO3401 | SOT-23 | Q1 |
| 1 | SCREW_TERMINAL_01X02 Screw_Terminal_01x02 | Altech_AK100_1x02_P5.00mm | J1 |
| 1 | CONN_01X03 Conn_01x03 | PinSocket_1x03_P2.54mm_Vertical | J2 |
| 1 | CONN_02X04_COUNTER_CLOCKWISE Conn_02x04_Counter_Clockwise | PinSocket_2x04_P2.54mm_Vertical | J3 |
| 3 | S2B-PH-SM4-TB | JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | BAT1, PLANT1, SOLAR1 |
| 2 | S2B-PH-SM4-TB | JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | BUCK_IN1, BUCK_OUT1 |
| 1 | (EN) | SW_PUSH_6mm_H13mm | SW2 |
| 1 | 1N4148WS | D_SOD-323_HandSoldering | D1 |
| 4 | 4.7UF 4.7uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C3, C5, C10 |
| 4 | 100NF 100nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C4, C8, C9 |
| 1 | 1UF 1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 1 | 10UF 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7 |
| 2 | 100NF 100nF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C11, C12 |
| 2 | 1K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 1 | 1M | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 2 | 10K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R9 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 330 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | 1.6K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6 |
| 1 | 2K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
| 1 | 3K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8 |
| 1 | 220 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10 |
Plant Buddy design files
The KiCad project lives in the mkhairyx/Plant_Buddy repository on GitHub; these links point at the commit this page was built from.
Plant Buddy: common questions
What microcontroller does the Plant Buddy use?
The Plant Buddy is built around the ESP32 DevKit, from the ESP32 family.
How big is the Plant Buddy PCB?
The Plant Buddy measures 80 × 80 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Plant Buddy?
37 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Plant Buddy design files?
From the mkhairyx/Plant_Buddy repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Plant Buddy design in my own project?
The repository has no license, so all rights stay with mkhairyx. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Plant Buddy without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k