HardLabs

Miguel's-Custom-Devboard - V2

MOB0926·Miguel-s-Custom-Devboard-RP2040·PCB/PCB-V2/Miguel's-Custom-Devboard - V2.kicad_pcb

Miguel's-Custom-Devboard - V2 PCB layout, top view — open source RP2040/RP2350 board by MOB0926

About the Miguel's-Custom-Devboard - V2 PCB

Miguel's-Custom-Devboard - V2 is an open source RP2040/RP2350 PCB design by MOB0926, published on GitHub. It is a 2-layer board measuring 21 × 51 mm, with 36 components from 18 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the MCP1700x-330xxTT and W25Q16JVZPIQ TR. By type, the board carries 18 capacitors, 8 resistors, 4 connectors, 3 ICs, 1 crystal and 1 switch.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

I followed the Custom Devboard Guided Project by Kai Pereira so it was not my design but I did rout the PCB myself an added and LED.

I followed the Custom Devboard Guided Project by Kai Pereira so it was not my design but I did rout the PCB myself an added and LED.

The designs and components are directly from the guide but the LED I added once I realized how empty the board was at the pcb design section.

Components: - RP 2040 - LED (SK6812-mini-e) This is not in KICAD lib, I had to use Master Lib - USB-C-2.0 - Voltage regulator (MCP1700T-3302E/TT) - Crystal Ocilater (12mhz) - I/O (1x20)x2 (1x3)x1 - Flash Memory/Storage (W25Q16JVZPIQ) (16-Mbi)

Miguel's-Custom-Devboard - V2, from the project README
From the project README

Main components on the Miguel's-Custom-Devboard - V2

RP2040MCP1700x-330xxTTW25Q16JVZPIQ TR

Miguel's-Custom-Devboard - V2 bill of materials (BOM)

36 components, 18 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RP2040
U1
1
MCP1700x-330xxTT
U2
1
W25Q16JVZPIQ TR
U3
1
12 MHz
Y1
1
USB_C_Receptacle_USB2.0_14P
J1
2
Conn_01x20
J2, J3
1
Conn_01x03
J4
1
SW_Push
SW1
1
SK6812MINI-E
LED1
2
1uF
C1, C10
12
0.1uF
C2, C3, C4, C5, C6, C7, C8, C9 +4
2
10uF
C13, C14
2
33pF
C15, C16
2
5.1K
R1, R2
2
27
R3, R4
2
1K
R5, R6
1
10K
R7
1
330
R8

Miguel's-Custom-Devboard - V2 design files

The KiCad project lives in the MOB0926/Miguel-s-Custom-Devboard-RP2040 repository on GitHub; these links point at the commit this page was built from.

Miguel's-Custom-Devboard - V2: common questions

What microcontroller does the Miguel's-Custom-Devboard - V2 use?

The Miguel's-Custom-Devboard - V2 is built around the RP2040, from the RP2040/RP2350 family.

How big is the Miguel's-Custom-Devboard - V2 PCB?

The Miguel's-Custom-Devboard - V2 measures 21 × 51 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Miguel's-Custom-Devboard - V2?

36 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Miguel's-Custom-Devboard - V2 design files?

From the MOB0926/Miguel-s-Custom-Devboard-RP2040 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Miguel's-Custom-Devboard - V2 design in my own project?

The repository has no license, so all rights stay with MOB0926. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Miguel's-Custom-Devboard - V2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in Miguel-s-Custom-Devboard-RP2040

Similar boards