Mini Drone
MohanrajDS·Mini_Drone·hardware/Mini_Drone.kicad_pcb
About the Mini Drone PCB
Mini Drone is an open source ESP32 PCB design by MohanrajDS, published on GitHub. It is a 4-layer board measuring 17.8 × 21 mm, with 28 components from 9 distinct parts.
Its main chip is the XIAO ESP32-S3, from the ESP32 family. Other key parts include the MPU-6050. By type, the board carries 9 resistors, 8 capacitors, 4 transistors, 4 diodes, 2 ICs and 1 connector.
It belongs with the robotics & motion designs in this gallery.
From the project
A compact 4-layer flight-controller PCB for micro drones, built around a Seeed XIAO ESP32-S3 module, an MPU-6050 IMU and four low-side MOSFET motor drivers for brushed (coreless) DC motors. The board measures about 17.75 x 20.95 mm and is designed in KiCad 9.
A compact 4-layer flight-controller PCB for micro drones, built around a Seeed XIAO ESP32-S3 module, an MPU-6050 IMU and four low-side MOSFET motor drivers for brushed (coreless) DC motors. The board measures about 17.75 x 20.95 mm and is designed in KiCad 9.
- ESP32-S3 (XIAO form factor) mounted on the board, with USB-C for programming - MPU-6050 6-axis IMU on I2C - 4 independent motor channels: AO3400A N-MOSFET low-side switch plus a 1N4148WT flyback diode per motor - 2-pin JST-EH battery connector feeding the motor supply rail - Test pads on every motor terminal, the battery rail and…

Main components on the Mini Drone
Mini Drone bill of materials (BOM)
28 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO ESP32-S3 | XIAO ESP32-S3 | U1 |
| 1 | MPU-6050 | InvenSense_QFN-24_4x4mm_P0.5mm | U2 |
| 4 | AO3400A | SOT-23 | Q1, Q2, Q3, Q4 |
| 1 | Conn_01x02 | JST_EH_S2B-EH_1x02_P2.50mm_Horizontal | J1 |
| 4 | 1N4148WT | D_SOD-523 | D1, D2, D3, D5 |
| 2 | 10nf | C_0603_1608Metric | C1, C4 |
| 1 | 100nf | C_0603_1608Metric | C2 |
| 5 | 1uf | C_0603_1608Metric | C3, C5, C6, C7, C8 |
| 9 | 10k UNI-ROYAL | R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R7, R8 +1 |
Mini Drone design files
The KiCad project lives in the MohanrajDS/Mini_Drone repository on GitHub; these links point at the commit this page was built from.
- Layouthardware/Mini_Drone.kicad_pcb
- Schematichardware/Mini_Drone.kicad_sch
Mini Drone: common questions
What microcontroller does the Mini Drone use?
The Mini Drone is built around the XIAO ESP32-S3, from the ESP32 family.
How big is the Mini Drone PCB?
The Mini Drone measures 17.8 × 21 mm, has 4 copper layers and is 0.19 mm thick.
How many components are on the Mini Drone?
28 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the Mini Drone design files?
From the MohanrajDS/Mini_Drone repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Mini Drone design in my own project?
The repository has no license, so all rights stay with MohanrajDS. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Mini Drone without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k