PROYECTO COMPLETO MOLLI
About the PROYECTO COMPLETO MOLLI PCB
PROYECTO COMPLETO MOLLI is an open source ESP32 PCB design by mollilla, published on GitHub. It is a 2-layer board measuring 89.5 × 84.9 mm, with 49 components from 18 distinct parts.
Its main chip is the ESP32_DEVKITC, from the ESP32 family. Other key parts include the EL817 and L7805. By type, the board carries 14 resistors, 10 connectors, 8 diodes, 6 ICs, 4 transistors and 4 relays.
Main components on the PROYECTO COMPLETO MOLLI
PROYECTO COMPLETO MOLLI bill of materials (BOM)
49 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | EL817 | DIP-4_W7.62mm | U1, U2, U3, U4 |
| 1 | L7805 | TO-263-3_TabPin2 | U5 |
| 1 | ESP32_DEVKITC | ESP32S | U6 |
| 4 | MMBT2222A | SOT-23 | Q1, Q2, Q3, Q4 |
| 1 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J2 |
| 8 | Screw_Terminal_01x03 | TerminalBlock_Xinya_XY308-2.54-3P_1x03_P2.54mm_Horizontal | J3, J11, J12, J13, J14, J15, J16, J17 |
| 4 | HK19F-DCxxV-SHC | Relay_DPDT_Finder_30.22 | K1, K2, K3, K4 |
| 4 | D | D_SMA | D1, D4, D6, D8 |
| 4 | LED | LED_0805_2012Metric | D2, D3, D5, D7 |
| 1 | 0.33 | C_0805_2012Metric | C1 |
| 1 | 0.1 | C_0805_2012Metric | C2 |
| 1 | 0.1 | C_Radial_D5.0mm_H5.0mm_P2.00mm | C3 |
| 4 | 100 | R_0805_2012Metric | R1, R3, R5, R7 |
| 4 | 510 | R_0805_2012Metric | R2, R4, R6, R8 |
| 1 | 1k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R9 |
| 1 | 2k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R10 |
| 4 | 1k | R_0805_2012Metric | R11, R12, R13, R14 |
PROYECTO COMPLETO MOLLI design files
The KiCad project lives in the mollilla/mollibot repository on GitHub; these links point at the commit this page was built from.
PROYECTO COMPLETO MOLLI: common questions
What microcontroller does the PROYECTO COMPLETO MOLLI use?
The PROYECTO COMPLETO MOLLI is built around the ESP32_DEVKITC, from the ESP32 family.
How big is the PROYECTO COMPLETO MOLLI PCB?
The PROYECTO COMPLETO MOLLI measures 89.5 × 84.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PROYECTO COMPLETO MOLLI?
49 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the PROYECTO COMPLETO MOLLI design files?
From the mollilla/mollibot repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the PROYECTO COMPLETO MOLLI design in my own project?
The repository has no license, so all rights stay with mollilla. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the PROYECTO COMPLETO MOLLI without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in mollibot
Similar boards
ESP32Open Book Abridged Edition
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1k
ESP32Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0k
ESP32Esp32 minimal
36.2 × 26.8 mm20 parts2LMIT4.0k
ESP32Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k
ESP32Controller
29 × 74 mm58 parts4LApache-2.03.8k
ESP32Bitaxe
skot
56.5 × 99.8 mm86 parts4LCERN-OHL-S-2.01.4k