J48-gal programmer
Monotoba·j48-gal-programmer·hardware/kicad/J48_RevH.kicad_sch
About the J48-gal programmer PCB
J48-gal programmer is an open source PCB design by Monotoba, published on GitHub under the Custom license license. It is a board, with 85 components from 42 distinct parts.
Other key parts include the AVR16DU28-I/SP, 74HC595, MCP4821-E/P, MIC2288YD5 and LM358. By type, the board carries 45 resistors, 16 capacitors, 8 ICs, 7 transistors, 4 connectors and 2 diodes.
It belongs with the usb & debug tools designs in this gallery.
From the project
J48 GAL / PAL Programmer: AVR16DU28-based programmer for 16V8–26CV12 GALs, with the Wingman host software.
- [ ] Run ERC in KiCad and assign footprints (the generated schematic has none) - [ ] Cross-check the 26CV12 programming pinout against published sources - [ ] Confirm the AVR DU's VDDDIV10 ADC input and USB operation at 3.3 V in the datasheet (DS40002576) - [ ] Confirm the C14 (VUSB) value and crystal-less USB - [ ] Check the LM358 VPP loop for oscillation at 5 V and 16.5 V - [ ] Breadboard on the SPDIP-28 AVR16DU28
Main components on the J48-gal programmer
J48-gal programmer bill of materials (BOM)
85 components, 42 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AVR16DU28-I/SP | U1 | |
| 2 | 74HC595 | U2, U9 | |
| 1 | MCP4821-E/P | U3 | |
| 1 | MIC2288YD5 | U4 | |
| 1 | LM358 | U6 | |
| 1 | 23LC1024-I/P | U7 | |
| 1 | LDL1117S33R | U8 | |
| 3 | AO3400 | Q1, Q4, Q5 | |
| 1 | BD139 | Q2 | |
| 1 | BC547 | Q3 | |
| 2 | AO3401 | Q6, Q7 | |
| 1 | ZIF-28, 0.3/0.6in | J1 | |
| 1 | USB-C 2.0 receptacle | J2 | |
| 1 | UPDI | J3 | |
| 1 | VSYS select 2x3 | J4 | |
| 1 | 500mA PTC | F1 | |
| 1 | latching push | SW1 | |
| 1 | LED | D1 | |
| 1 | SS14 | D2 | |
| 1 | 10uH Isat>=1.5A | L1 |
Show 22 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | 100n | C1, C3, C13, C15, C19 | |
| 2 | 10u | C2, C12 | |
| 1 | 1u/25V | C4 | |
| 2 | 100n/50V | C5, C11 | |
| 1 | 4.7u/50V | C9 | |
| 1 | 1n | C10 | |
| 1 | per DS (VUSB) | C14 | |
| 1 | 2.2u | C16 | |
| 1 | 1u | C17 | |
| 1 | 4.7u | C18 | |
| 16 | 100 | R1, R2, R3, R4, R5, R6, R7, R8 +8 | |
| 10 | 10k | R12, R15, R20, R21, R22, R23, R32, R33 +2 | |
| 7 | 100k | R13, R19, R36, R39, R40, R41, R42 | |
| 1 | 1k | R14 | |
| 1 | 68k 1% | R16 | |
| 2 | 10k 1% | R17, R27 | |
| 1 | 470 | R24 | |
| 1 | 22 | R25 | |
| 2 | 75k 1% | R26, R34 | |
| 1 | 4.7k | R28 | |
| 2 | 5.1k | R30, R31 | |
| 1 | 4.7k 1% | R35 |
J48-gal programmer design files
The KiCad project lives in the Monotoba/j48-gal-programmer repository on GitHub; these links point at the commit this page was built from.
- Schematichardware/kicad/J48_RevH.kicad_sch
J48-gal programmer: common questions
How many components are on the J48-gal programmer?
85 components, from 42 distinct parts. The full bill of materials is listed on this page.
Where can I download the J48-gal programmer design files?
From the Monotoba/j48-gal-programmer repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the J48-gal programmer design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
Similar boards
USB Hub Test
osy
50 × 50 mm85 parts4LCC-BY-4.0703XG Station Power
osy
54.3 × 91 mm9 parts2LCC-BY-4.0703FW-EC-DongleHiderPlus
LeoDJ
28.2 × 26.1 mm14 parts4LCERN-OHL-W-2.0497Adapter tsop48
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter tsop48 solder
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter soic8 solder
bbogush
48 × 20 mm3 parts2LGPL-3.0389