11 open source boards using the 23LC1024-I/P
Real designs built with the 23LC1024-I/P, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Riscduino Fpga Rev1.1
dineshannayya
104.3 × 63.6 mm101 parts2LNo license2Riscduino Uno
dineshannayya
70.6 × 53.7 mm90 parts2LApache-2.02AVR/Arduino
Nano delay pedal
barlasardic
55.9 × 88.9 mm57 parts2LMIT0- schematic only · 85 parts
J48-gal programmer
Monotoba
85 partsCustom license0 - schematic only · 52 partsTI MSP430/CC
MSP430handheld hardware
aradanmn
52 partsNo license0 Riscduino Debug Rev1.4
dineshannayya
81.7 × 63.6 mm95 parts2LNo license2Riscduino Debug
dineshannayya
70.6 × 53.7 mm81 parts2LApache-2.02Riscduino Uno
dineshannayya
68.8 × 53.6 mm90 parts2LNo license2Riscduino Tester
dineshannayya
100.8 × 53.6 mm88 parts2LNo license2AVR/Arduino
Riscduino ATMEGA Adpater Rev1.0
dineshannayya
88.7 × 27.6 mm70 parts2LNo license2Riscduino Adpater Rev1.0
dineshannayya
92.5 × 93.8 mm49 parts2LNo license2
The 23LC1024-I/P in open source designs
The gallery holds 11 open source boards using the 23LC1024-I/P from 5 GitHub repositories; a typical one measures about 81.7 × 53.7 mm and carries around 85 components.
100% are two-layer designs, the rest use four layers or more, and 27% carry an open source license.
The most starred is Riscduino Fpga Rev1.1 by dineshannayya.
Parts used alongside the 23LC1024-I/P
Microcontrollers on boards using the 23LC1024-I/P
What boards using the 23LC1024-I/P are built for
23LC1024-I/P: common questions
Where can I find a 23LC1024-I/P reference design?
Each of the 11 boards on this page is a real design using the 23LC1024-I/P. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the 23LC1024-I/P?
The CH340C, LM1117MP-3.3, LM1117S-ADJ, MAX1232ESA+T and Riscduino appear in the most repositories here.
Which microcontrollers do boards using the 23LC1024-I/P use?
Most are built on AVR/Arduino (2) and TI MSP430/CC (1).
How big is a typical board using the 23LC1024-I/P?
The median is 81.7 × 53.7 mm, and 100% are two-layer designs.
What is the most popular open source board using the 23LC1024-I/P?
By GitHub stars, Riscduino Fpga Rev1.1 by dineshannayya, with 2 stars.
Can I simulate one of these boards using the 23LC1024-I/P before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.