7 open source boards using the 29F160

Real designs built with the 29F160, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

The 29F160 in open source designs

The gallery holds 7 open source boards using the 29F160 from 4 GitHub repositories; a typical one measures about 110.7 × 69.8 mm and carries around 52 components.

71% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.

The most starred is SNES AdvancedFlash 1-2 by MouseBiteLabs.

Parts used alongside the 29F160

Microcontrollers on boards using the 29F160

What boards using the 29F160 are built for

29F160: common questions

Where can I find a 29F160 reference design?

Each of the 7 boards on this page is a real design using the 29F160. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the 29F160 use?

Most are built on PIC (3) and AVR/Arduino (1).

How big is a typical board using the 29F160?

The median is 110.7 × 69.8 mm, and 71% are two-layer designs.

What is the most popular open source board using the 29F160?

By GitHub stars, SNES AdvancedFlash 1-2 by MouseBiteLabs, with 68 stars.

Can I simulate one of these boards using the 29F160 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part