DAC1 Main board

mpinese·electronics-dac·design/pcbs/mainboard/mainboard.kicad_pcb

DAC1 Main board layout, top view — open source STM32 board by mpinese

About the DAC1 Main board

DAC1 Main board is an open source STM32 PCB design by mpinese, published on GitHub. It is a 4-layer board measuring 150 × 130 mm, with 232 components from 68 distinct parts.

Its main chip is the STM8S003F3P, from the STM32 family. Other key parts include the TPS7A49, TPS7A30, TLV1117-33, KC3225K24.5760C1GE00 and Combo384. By type, the board carries 97 capacitors, 76 resistors, 20 ICs, 12 transistors, 8 jumpers and 7 diodes.

It belongs with the audio designs in this gallery.

From the project

An (Almost) No Compromise USB Stereo DAC

This project is still under active design, and is not yet completed! Do not build it expecting a functional device... yet.

This project describes the hardware and firmware for a high-quality DIY USB stereo digital to analogue converter (DAC) with optional integrated digital volume control and headphone amplifier.

I was after a DAC for my computer headphone setup. Seeing as I enjoy a bit of DIY hardware, I thought to have a go at designing the ideal DAC for me. This would be a high-quality but fairly compact single-box DAC, with integrated preamp and headphone amplifier. If stereo line out…

Main components on the DAC1 Main board

STM8S003F3PTPS7A49TPS7A30TLV1117-33KC3225K24.5760C1GE00Combo3845PB1102OPA1612AXDTPS79318-EPSRC4392PCM1792ASI8645BA-B-IULME49600

DAC1 Main board bill of materials (BOM)

232 components, 68 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM8S003F3P
U1
3
TPS7A49
U2, U5, U19
2
TPS7A30
U3, U16
1
TLV1117-33
U4
1
KC3225K24.5760C1GE00
U6
1
Combo384
U7
1
5PB1102
U8
4
OPA1612AXD
OPA1612AxD
U9, U13, U15, U18
1
TPS79318-EP
U10
1
SRC4392
U11
1
PCM1792A
U12
1
SI8645BA-B-IU
Si8645BA-B-IU
U14
2
LME49600
U17, U20
10
SS8050
Q1, Q2, Q4, Q5, Q6, Q7, Q8, Q9 +2
2
SS8550
Q3, Q10
2
Conn_01x04
J5, J6
1
Conn_01x03
J9
1
889-1818
AudioJackSw
J10
2
Jumper
JP2, JP3
6
~
JP4, JP5, JP6, JP7, JP8, JP9
Show 48 more
QtyPartRefs
2
EC2-5NU
K1, K2
2
EC2-12NU
K3, K4
1
P091S-FC20BR10K
RV1
1
M7
D1
4
5V6
D2, D3, D6, D7
2
D
D4, D5
2
Optional
FB1, FB2
1
Ferrite_Bead_Small
FB3
7
1u
C1, C7, C8, C10, C20, C73, C89
24
0.1u
C2, C3, C26, C32, C33, C41, C44, C45 +16
9
47U
47u
C4, C5, C6, C12, C15, C77, C78, C86 +1
14
10n
C9, C11, C17, C18, C19, C21, C22, C28 +6
5
2.2u
C13, C14, C27, C76, C90
1
100U
100u
C16
18
10u
C23, C25, C30, C31, C36, C43, C49, C50 +10
4
430P
430p
C24, C47, C53, C69
1
47U
47u
C29
4
1.2N
1.2n
C37, C38, C65, C66
1
10n
C39
2
22u
C40, C82
2
47U
47u
C42, C59
1
2.2u
C55
4
2.2U
2.2u
C79, C80, C94, C95
6
10k
R1, R5, R21, R32, R37, R71
5
1
R2, R3, R4, R56, R62
2
2.4k
R6, R9
2
100
R7, R8
4
27k
R10, R24, R58, R67
4
2.2k
R11, R13, R72, R74
4
5.6k
R12, R14, R68, R69
4
33k
R15, R19, R57, R66
1
75
R16
4
330k
R17, R18, R54, R64
2
15k
R20, R73
4
120k
R22, R23, R55, R65
1
68k
R25
1
220k
R26
4
820
R27, R35, R43, R53
4
1k
R28, R30, R48, R50
6
Optional
R29, R36, R40, R45, R51, R52
2
22k
R31, R63
4
270
R33, R34, R46, R47
2
25
R38, R42
3
10
R39, R41, R44
1
4.7
R49
2
Open
R59, R76
2
4.7K
4.7k
R60, R70
2
0
R61, R75

DAC1 Main board design files

The KiCad project lives in the mpinese/electronics-dac repository on GitHub; these links point at the commit this page was built from.

DAC1 Main board: common questions

What microcontroller does the DAC1 Main board use?

The DAC1 Main board is built around the STM8S003F3P, from the STM32 family.

How big is the DAC1 Main board?

The DAC1 Main board measures 150 × 130 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the DAC1 Main board?

232 components, from 68 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the DAC1 Main board design files?

From the mpinese/electronics-dac repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the DAC1 Main board design in my own project?

The repository has no license, so all rights stay with mpinese. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the DAC1 Main board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in electronics-dac

Similar boards