11 open source boards using the OPA1612AXD

Real designs built with the OPA1612AXD, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

11 boardsClear filters|Most starred

How designs wire the OPA1612AXD

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the OPA1612AXD connects to, and the resistors, capacitors and other passives placed on it.

  • The + pins have a series resistor on 8 of 8 designs, most often 10 kΩ (then 1 kΩ).
  • Pin 1 has a series resistor on 7 of 8 designs, most often 1 kΩ (then 10 kΩ).
  • The -_6 pin has a series resistor on 7 of 8 designs, most often 10 kΩ (then 3 kΩ).
  • The -_2 pin has a series resistor on 6 of 8 designs, most often 10 kΩ (then 3 kΩ).
Pin 1Connected to: OPA1622 25%
  • Series resistor on 88% · 1 kΩ (2), 10 kΩ (2), 3 kΩ (1)
  • Series capacitor on 50% · 1.5 nF (1), 2.2 nF (1), 180 pF (1)
-_2pin 2Connected to: PCM1792A 25%
  • Series resistor on 75% · 10 kΩ (4), 3 kΩ (1), 800 Ω (1)
  • Series capacitor on 50% · 1.5 nF (1), 2.2 nF (1), 180 pF (1)
+_3pin 3Connected to: Signal 50% · GND 38%
  • Series resistor on 38% · 10 kΩ (2), 10 Ω (1)
V-_4pin 4Connected to: 4.5V 75%
  • Decoupling capacitor on 63% · 100 nF (6), 10 nF (1), 10 µF (1)
+_5pin 5Connected to: Signal 63% · GND 38%
  • Series resistor on 50% · 10 kΩ (2), 10 Ω (1), 470 kΩ (1)
  • Resistor to GND on 38% · 10 kΩ (2), 470 kΩ (1)
-_6pin 6Connected to: PCM1792A 25%
  • Series resistor on 88% · 10 kΩ (4), 3 kΩ (1), 800 Ω (1)
  • Series capacitor on 50% · 1.5 nF (1), 2.2 nF (1), 180 pF (1)
+pin 7, 9Connected to: Signal 83% · not connected 17%
  • Series resistor on 100% · 10 kΩ (4), 1 kΩ (2), 7.5 kΩ (2)
  • Series capacitor on 50% · 1.5 nF (1), 2.2 nF (1), 180 pF (1)
V+_8pin 8Connected to: 4.5V 88%
  • Decoupling capacitor on 75% · 100 nF (7), 10 nF (1), 10 µF (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include AmplifierHat by RasmusStagsted, Headphone-DAC-AMP by ddabidov, Intro to-CAD-2026 by frohro and High-Performance-DAC-system by saketharjun12-boop.

The OPA1612AXD in open source designs

The gallery holds 11 open source boards using the OPA1612AXD from 8 GitHub repositories; a typical one measures about 100 × 75 mm and carries around 167 components.

82% use four copper layers or more, and 36% carry an open source license.

The most starred is AmplifierHat by RasmusStagsted.

Microcontrollers on boards using the OPA1612AXD

What boards using the OPA1612AXD are built for

OPA1612AXD: common questions

Where can I find a OPA1612AXD reference design?

Each of the 11 boards on this page is a real design using the OPA1612AXD. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the OPA1612AXD + pin?

The + pins have a series resistor on 8 of 8 designs, most often 10 kΩ (then 1 kΩ). Counted from the KiCad layouts of 8 open source designs using the OPA1612AXD.

What resistor goes on the OPA1612AXD pin 1?

Pin 1 has a series resistor on 7 of 8 designs, most often 1 kΩ (then 10 kΩ). Counted from the KiCad layouts of 8 open source designs using the OPA1612AXD.

What resistor goes on the OPA1612AXD -_6 pin?

The -_6 pin has a series resistor on 7 of 8 designs, most often 10 kΩ (then 3 kΩ). Counted from the KiCad layouts of 8 open source designs using the OPA1612AXD.

What parts are used alongside the OPA1612AXD?

The OPA1622, AMS1117-3.3, LM27762, PCM1792A and RP2354A appear in the most repositories here.

Which microcontrollers do boards using the OPA1612AXD use?

Most are built on RP2040/RP2350 (4), ESP32 (1), FPGA (1) and STM32 (1).

How big is a typical board using the OPA1612AXD?

The median is 100 × 75 mm, and 18% are two-layer designs.

What is the most popular open source board using the OPA1612AXD?

By GitHub stars, AmplifierHat by RasmusStagsted, with 4 stars.

Can I simulate one of these boards using the OPA1612AXD before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part