8 open source boards using the TPS7A30

Real designs built with the TPS7A30, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

The TPS7A30 in open source designs

The gallery holds 8 open source boards using the TPS7A30 from 4 GitHub repositories; a typical one measures about 140.2 × 57.3 mm and carries around 82 components.

63% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.

The most starred is CleanLVSupply by BlockWorker.

Parts used alongside the TPS7A30

Microcontrollers on boards using the TPS7A30

What boards using the TPS7A30 are built for

TPS7A30: common questions

Where can I find a TPS7A30 reference design?

Each of the 8 boards on this page is a real design using the TPS7A30. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the TPS7A30 use?

Most are built on STM32 (1).

How big is a typical board using the TPS7A30?

The median is 140.2 × 57.3 mm, and 63% are two-layer designs.

What is the most popular open source board using the TPS7A30?

By GitHub stars, CleanLVSupply by BlockWorker, with 2 stars.

Can I simulate one of these boards using the TPS7A30 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part