9 open source boards using the TPS7A49
Real designs built with the TPS7A49, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
GammaSpectrometer
RobertGawron
100 × 100 mm291 parts4LMIT16STM32
DAC1 Main board
mpinese
150 × 130 mm232 parts4LNo license0Reproduce amplifier rtr
sibiryakov
139 × 78 mm116 parts2LMIT0Deloop lite mk0
hmcty
178 × 83.3 mm84 parts4LMIT0Isolated Power
bec5-group
195.6 × 139.1 mm265 parts2LNo license0Pedal split supply
hmcty
52.5 × 30.5 mm24 parts2LMIT0Pid tweak
bec5-group
133.6 × 48 mm119 parts2LNo license0Power
bec5-group
96.5 × 66.6 mm77 parts2LNo license0Power Test
bec5-group
146.8 × 36.8 mm72 parts2LNo license0
How designs wire the TPS7A49
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TPS7A49 connects to, and the resistors, capacitors and other passives placed on it.
- The NC_7 pin is left unconnected on 5 of 5 designs.
- The EN_5 pin has a capacitor to GND on 4 of 5 designs, most often 10 µF (then 1 µF).
- The NR_6 pin has a capacitor to GND on 4 of 5 designs, most often 10 nF.
- The IN_8 pin has a capacitor to GND on 4 of 5 designs, most often 10 µF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| OUT_1pin 1 | Connected to: 7V 60% · a signal 40% | — |
| FB_2pin 2 | Connected to: Signal 100% |
|
| NC_3pin 3 | Connected to: Not connected 60% · GND 20% · a signal 20% | — |
| GND_4pin 4 | Connected to: GND 80% · a signal 20% | — |
| EN_5pin 5 | Connected to: Signal 80% · VCC 20% |
|
| NR_6pin 6 | Connected to: Signal 100% |
|
| NC_7pin 7 | Connected to: Not connected 100% | — |
| IN_8pin 8 | Connected to: Signal 80% · VCC 20% |
|
| GND_9pin 9 | Connected to: GND 80% · a signal 20% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include GammaSpectrometer by RobertGawron, Isolated Power by bec5-group, Deloop lite mk0 by hmcty and DAC1 Main board by mpinese.
The TPS7A49 in open source designs
The gallery holds 9 open source boards using the TPS7A49 from 5 GitHub repositories; a typical one measures about 139 × 78 mm and carries around 116 components.
67% are two-layer designs, the rest use four layers or more, and 44% carry an open source license.
The most starred is GammaSpectrometer by RobertGawron.
Parts used alongside the TPS7A49
What boards using the TPS7A49 are built for
TPS7A49: common questions
Where can I find a TPS7A49 reference design?
Each of the 9 boards on this page is a real design using the TPS7A49. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TPS7A49 NC_7 pin connected?
The NC_7 pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the TPS7A49.
How is the TPS7A49 EN_5 pin connected?
The EN_5 pin has a capacitor to GND on 4 of 5 designs, most often 10 µF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the TPS7A49.
How is the TPS7A49 NR_6 pin connected?
The NR_6 pin has a capacitor to GND on 4 of 5 designs, most often 10 nF. Counted from the KiCad layouts of 5 open source designs using the TPS7A49.
Which microcontrollers do boards using the TPS7A49 use?
Most are built on FPGA (1) and STM32 (1).
How big is a typical board using the TPS7A49?
The median is 139 × 78 mm, and 67% are two-layer designs.
What is the most popular open source board using the TPS7A49?
By GitHub stars, GammaSpectrometer by RobertGawron, with 16 stars.
Can I simulate one of these boards using the TPS7A49 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.