Proyecto-Byul
mpph21·Proyecto-Byul·byulPcb/byulPCB.kicad_pcb
About the Proyecto-Byul PCB
Proyecto-Byul is an open source ESP32 PCB design by mpph21, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 8 components from 8 distinct parts.
Its main chip is the ESP32-DEVKIT-V1, from the ESP32 family. Other key parts include the mh-cd42 and tftspi. By type, the board carries 4 connectors, 3 ICs and 1 battery holder.
It belongs with the robotics & motion designs in this gallery.
From the project
Robot capaz de difundir información sobre primeros auxilios, además de medir diferentes parámetros vitales.
El presente proyecto muestra el proceso de diseño de un robot capaz de difundir información sobre el proceso de brindar primeros auxilios, además de medir diferentes parámetros vitales y con estos brindar recomendaciones de cómo actuar de acuerdo al estado en el que se encuentra la persona analizada. Este se basa en la problemática existente del desconocimiento en primeros auxilios y los efectos que tiene este desconocimiento en la población. Para el desarrollo del proyecto se optó por escoger la población de la Universidad Nacional de Colombia (Sede Bogotá), puesto se determinó que sería un…
Main components on the Proyecto-Byul
Proyecto-Byul bill of materials (BOM)
8 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-DEVKIT-V1 | MODULE_ESP32_DEVKIT_V1 | U1 |
| 1 | mh-cd42 | mh-cd42 | U3 |
| 1 | tftspi | tftspi | U4 |
| 1 | MLX90614 | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | MAX30102 | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | Barrel_Jack_Switch | BarrelJack_Horizontal | J4 |
| 1 | HC_SR04 | PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | Battery | BatteryHolder_MPD_BH-18650-PC2 | BT1 |
Proyecto-Byul design files
The KiCad project lives in the mpph21/Proyecto-Byul repository on GitHub; these links point at the commit this page was built from.
- LayoutbyulPcb/byulPCB.kicad_pcb
- SchematicbyulPcb/byulPCB.kicad_sch
Proyecto-Byul: common questions
What microcontroller does the Proyecto-Byul use?
The Proyecto-Byul is built around the ESP32-DEVKIT-V1, from the ESP32 family.
How big is the Proyecto-Byul PCB?
The Proyecto-Byul measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Proyecto-Byul?
8 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Proyecto-Byul design files?
From the mpph21/Proyecto-Byul repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Proyecto-Byul design in my own project?
The repository has no license, so all rights stay with mpph21. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Proyecto-Byul without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k