Air quality sensor
mrdexterssj·air-quality-sensor·co2-detector/co2-detector.kicad_pcb
About the Air quality sensor PCB
Air quality sensor is an open source ESP32 PCB design by mrdexterssj, published on GitHub under the MIT license. It is a 2-layer board measuring 37 × 75.5 mm, with 7 components from 7 distinct parts.
Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. By type, the board carries 2 connectors, 1 IC, 1 buzzer, 1 switch, 1 diode and 1 resistor.
It belongs with the sensors and displays & leds designs in this gallery.
From the project
A custom CO2 detector that displays the information on an OLED screen and has a LED Alarm. Made for Half Life W4! #YSWS
A custom CO2 detector that displays the information on an OLED screen and has a LED Alarm. Made for Half Life W4! #YSWS
Uses the MQ-135 air quality sensor to detect the ppm os different nocive gases present in the air surrounding the device Has an 0.96 inches OLED screen to display the sensor's information and recommendations Has an alarm feature, where if the ppm exceed a certain threshold, an LED starts blinking and the screen shows a warning The alarm includes a buzzer that makes sounds at the same time the LED blinks (not added to the firmware yet) It also has a button the user can click…
Main components on the Air quality sensor
Air quality sensor bill of materials (BOM)
7 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-C3-SMD | XIAO-ESP32-C3-SMD | U1 |
| 1 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | Conn_01x04_Pin | Display_128x64_096_I2C | J2 |
| 1 | Buzzer | Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | SW_Push | SW_PUSH_6mm | SW1 |
| 1 | LED | LED_D5.0mm | D1 |
| 1 | R | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
Air quality sensor design files
The KiCad project lives in the mrdexterssj/air-quality-sensor repository on GitHub; these links point at the commit this page was built from.
Air quality sensor: common questions
What microcontroller does the Air quality sensor use?
The Air quality sensor is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.
How big is the Air quality sensor PCB?
The Air quality sensor measures 37 × 75.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Air quality sensor?
7 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the Air quality sensor design files?
From the mrdexterssj/air-quality-sensor repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Air quality sensor design in my own project?
Yes, under the terms of its MIT license, which mrdexterssj chose for the repository.
Can I test firmware for the Air quality sensor without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k