DAQ Board 2026-27
About the DAQ Board 2026-27
DAQ Board 2026-27 is an open source PCB design by MSTRocketDesignTeam, published on GitHub under the AGPL-3.0 license. It is a 2-layer board measuring 30.7 × 41.2 mm, with 24 components from 13 distinct parts.
By type, the board carries 9 capacitors, 4 resistors, 2 connectors, 2 diodes and 1 crystal.
It belongs with the robotics & motion designs in this gallery.
From the project
Evolution of the RDT's Custom Liquid Engine Control Unit!
Future developments may allow for preflight simulations (FEA / CFD of engine, estimated throttling curve, etc.).
DAQ Board 2026-27 bill of materials (BOM)
24 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ECS-100-S-20A-TR | XTAL_ECS-100-S-20A-TR | Y1 |
| 2 | Conn_01x15 | PinHeader_1x15_P2.54mm_Vertical | J1, J2 |
| 1 | ADS1256IDBR | SOP65P780X200-28N | ADC1 |
| 3 | MAX31855KASA | SOIC-8_3.9x4.9mm_P1.27mm | TC1, TC2, TC3 |
| 1 | MCP1792T-3302H/DB | SOT-223-3_TabPin2 | V1 |
| 1 | MCP1792T-5002H/DB | SOT-223-3_TabPin2 | V2 |
| 2 | LED | LED_0603_1608Metric | D1, D2 |
| 3 | 100nF | C_0402_1005Metric | C1, C2, C3 |
| 4 | 10uF | C_0805_2012Metric | C4, C5, C8, C9 |
| 2 | 100nF | C_0805_2012Metric | C6, C7 |
| 1 | 160Ω | R_0603_1608Metric | R1 |
| 1 | 510Ω | R_0603_1608Metric | R2 |
| 2 | 10k | R_0603_1608Metric | R3, R4 |
DAQ Board 2026-27 design files
The KiCad project lives in the MSTRocketDesignTeam/Liquid-Engine-Controller repository on GitHub; these links point at the commit this page was built from.
DAQ Board 2026-27: common questions
How big is the DAQ Board 2026-27?
The DAQ Board 2026-27 measures 30.7 × 41.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DAQ Board 2026-27?
24 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the DAQ Board 2026-27 design files?
From the MSTRocketDesignTeam/Liquid-Engine-Controller repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the DAQ Board 2026-27 design in my own project?
Yes, under the terms of its AGPL-3.0 license, which MSTRocketDesignTeam chose for the repository.
More boards in Liquid-Engine-Controller
RP2040/RP2350LEC
152.9 × 77.2 mm66 parts4LAGPL-3.02
DAQ module
38 × 58.5 mm52 parts4LAGPL-3.02
RP2040/RP2350LEC Main Board
146.1 × 144.9 mm51 parts2LAGPL-3.02
DAQ HAT
146.1 × 144.9 mm20 parts2LAGPL-3.02
LEC RF
60 × 40 mm11 parts2LAGPL-3.02
XBeeBreakoutBoard
47.5 × 62.9 mm9 parts2LAGPL-3.02
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Cube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k
11ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979
Trollerv2
100 × 75 mm33 parts4LGPL-3.0979
Powerstep
95.2 × 71.5 mm28 parts4LGPL-3.0979
Diff driver
32 × 22 mm14 parts2LGPL-3.0979