DAQ HAT
About the DAQ HAT
DAQ HAT is an open source PCB design by MSTRocketDesignTeam, published on GitHub under the AGPL-3.0 license. It is a 2-layer board measuring 146.1 × 144.9 mm, with 20 components from 20 distinct parts.
Other key parts include the DAQ_Module and UA78M09CKVURG3. By type, the board carries 12 connectors, 3 resistors, 2 ICs and 2 capacitors.
It belongs with the robotics & motion and dev boards & breakouts designs in this gallery.
From the project
Evolution of the RDT's Custom Liquid Engine Control Unit!
Future developments may allow for preflight simulations (FEA / CFD of engine, estimated throttling curve, etc.).
Main components on the DAQ HAT
DAQ HAT bill of materials (BOM)
20 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DAQ_Module | DAQ_Module | U1 |
| 1 | UA78M09CKVURG3 | TO-252-2 | U2 |
| 1 | Fuel_Tank_PT | TENSILITY_54-00278 | J1 |
| 1 | Ox_Tank_PT | TENSILITY_54-00278 | J2 |
| 1 | Fuel_dPT | TENSILITY_54-00278 | J3 |
| 1 | Ox_dPT | TENSILITY_54-00278 | J4 |
| 1 | Ox_Manifold_PT | TENSILITY_54-00278 | J5 |
| 1 | Fuel_Manifold_PT | TENSILITY_54-00278 | J6 |
| 1 | Chamber_PT | TENSILITY_54-00278 | J7 |
| 1 | Ox_Tank_TC | PinHeader_1x02_P2.54mm_Vertical | J8 |
| 1 | Chamber_Wall_TC1 | PinHeader_1x02_P2.54mm_Vertical | J9 |
| 1 | Chamber_Wall_TC2 | PinHeader_1x02_P2.54mm_Vertical | J10 |
| 1 | Conn_02x07_Odd_Even | PinHeader_2x07_P2.54mm_Vertical | J11 |
| 1 | Fan_Conn | PinHeader_1x02_P2.54mm_Vertical | J13 |
| 1 | SSM3K2615R_LF | SOT-23F_TOS | MOSFET1 |
| 1 | 100n | C_0603_1608Metric | C1 |
| 1 | 0.33u | C_1206_3216Metric | C2 |
| 1 | 100 | R_0603_1608Metric | R1 |
| 1 | 10K | R_0603_1608Metric | R2 |
| 1 | 1k | R_1206_3216Metric | R4 |
DAQ HAT design files
The KiCad project lives in the MSTRocketDesignTeam/Liquid-Engine-Controller repository on GitHub; these links point at the commit this page was built from.
DAQ HAT: common questions
How big is the DAQ HAT?
The DAQ HAT measures 146.1 × 144.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DAQ HAT?
20 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the DAQ HAT design files?
From the MSTRocketDesignTeam/Liquid-Engine-Controller repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the DAQ HAT design in my own project?
Yes, under the terms of its AGPL-3.0 license, which MSTRocketDesignTeam chose for the repository.
More boards in Liquid-Engine-Controller
RP2040/RP2350LEC
152.9 × 77.2 mm66 parts4LAGPL-3.02
DAQ module
38 × 58.5 mm52 parts4LAGPL-3.02
RP2040/RP2350LEC Main Board
146.1 × 144.9 mm51 parts2LAGPL-3.02
DAQ Board 2026-27
30.7 × 41.2 mm24 parts2LAGPL-3.02
LEC RF
60 × 40 mm11 parts2LAGPL-3.02
XBeeBreakoutBoard
47.5 × 62.9 mm9 parts2LAGPL-3.02
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
88 Pin Vag Breakout
142 × 58 mm91 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k