HardLabs

Mtdelectronic-IGDAS-Hardware

mtdurali·mtdelectronic-IGDAS-Hardware

Mtdelectronic-IGDAS-Hardware PCB layout, top view — open source ESP32 board by mtdurali

About the Mtdelectronic-IGDAS-Hardware PCB

Mtdelectronic-IGDAS-Hardware is an open source ESP32 PCB design by mtdurali, published on GitHub. It is a 2-layer board measuring 43.5 × 36 mm, with 30 components from 18 distinct parts.

Its main chip is the XIAO ESP32C3, from the ESP32 family. Other key parts include the ADXL335BCPZ-RL7 and LM2596S-5. By type, the board carries 16 resistors, 5 capacitors, 3 ICs, 3 diodes, 2 inductors and 1 microphone.

It belongs with the sensors designs in this gallery.

From the project

İGDAŞ sayaç testlerinde kullanılan ilk sensör kartının KiCad şeması, PCB tasarımı ve malzeme listesi.

İGDAŞ sayaç testlerinde kullanılan ilk sensör kartının KiCad şeması, PCB tasarımı ve malzeme listesi.

Bu depo, projenin başlangıcındaki çok sensörlü kart tasarımını ve donanım geliştirme sürecini arşivler. Güncel test ve geliştirme çalışmaları, yurt dışından doğrudan temin edilen orijinal INMP441 sensörüyle devam etmektedir.

Aşağıdaki süreç, proje ekibinin test ve tedarik deneyimini özetler.

Main components on the Mtdelectronic-IGDAS-Hardware

ADXL335BCPZ-RL7XIAO ESP32C3LM2596S-5

Mtdelectronic-IGDAS-Hardware bill of materials (BOM)

30 components, 18 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ADXL335BCPZ-RL7
U2
1
XIAO ESP32C3
U3
1
LM2596S-5
U4
1
SPH0645LM4H
MK1
1
RED_LED
D1
1
Green_LED
D3
1
C77393
SS2PH10
D4
1
ADXL372BCCZ-RL7
L1
1
C501932
33uH
L3
2
0.1uF
C1, C2
1
1uF
C3
1
C79110
680uF/25V
C6
1
C79110
220uF/6V-6.3V
C8
10
0R
R2, R3, R4, R5, R6, R7, R8, R9 +2
2
4.7k
R10, R11
2
100K
R14, R15
1
1.5k
R16
1
2.2K
R19

Mtdelectronic-IGDAS-Hardware design files

The KiCad project lives in the mtdurali/mtdelectronic-IGDAS-Hardware repository on GitHub; these links point at the commit this page was built from.

Mtdelectronic-IGDAS-Hardware: common questions

What microcontroller does the Mtdelectronic-IGDAS-Hardware use?

The Mtdelectronic-IGDAS-Hardware is built around the XIAO ESP32C3, from the ESP32 family.

How big is the Mtdelectronic-IGDAS-Hardware PCB?

The Mtdelectronic-IGDAS-Hardware measures 43.5 × 36 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Mtdelectronic-IGDAS-Hardware?

30 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Mtdelectronic-IGDAS-Hardware design files?

From the mtdurali/mtdelectronic-IGDAS-Hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Mtdelectronic-IGDAS-Hardware design in my own project?

The repository has no license, so all rights stay with mtdurali. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Mtdelectronic-IGDAS-Hardware without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards