KIKAD
About the KIKAD PCB
KIKAD is an open source PCB design by MUBARIS-KT, published on GitHub. It is a 2-layer board measuring 263.3 × 128 mm, with 133 components from 41 distinct parts.
Other key parts include the Opamp_Dual, BluePill, L7812, L7805 and AMS1117-3.3. By type, the board carries 60 resistors, 20 capacitors, 14 diodes, 8 transistors, 7 ICs and 3 connectors.
From the project
This project provides the complete design and code for a DC to DC converter that steps up 12V DC to 300V DC. The project is a comprehensive solution in power electronics, including PCB design, STM32 code for PWM generation, datasheets, design references, and the full converter de
This project provides the complete design and code for a DC to DC converter that steps up 12V DC to 300V DC. The project is a comprehensive solution in power electronics, including PCB design, STM32 code for PWM generation, datasheets, design references, and the full converter design.
- High Voltage Conversion: Steps up 12V DC input to 300V DC output. - PCB Design: Includes a custom PCB layout tailored for the converter. - STM32 PWM Generation: Code for PWM signal generation to drive the converter. - Comprehensive Documentation: Includes datasheets and design references for all components…
Main components on the KIKAD
KIKAD bill of materials (BOM)
133 components, 41 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Opamp_Dual | DIP-8_W7.62mm | U2 |
| 1 | BluePill | BluePill_1 | U3 |
| 1 | ~ | DIP-8_W7.62mm | U4 |
| 1 | L7812 | TO-220-3_Vertical_HS48_PL48_Heatsink | U5 |
| 1 | L7805 | TO-220-3_Vertical_HS48_PL48_Heatsink | U6 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U7 |
| 1 | ACS712xLCTR-05B | SOIC-8_3.9x4.9mm_P1.27mm | U8 |
| 4 | TO-220*3_HS_inverter_type | 3 FET heatsink inverter type | Q1, Q2, Q14, Q15 |
| 4 | MMSS8050 | TO-92 | Q13, Q17, Q21, Q25 |
| 1 | 01x02 | TerminalBlock_bornier-2_P5.08mm | J2 |
| 1 | Barrel_Jack_Switch | BarrelJack_Horizontal | J3 |
| 1 | PINHD_1x2_Female | 2pin_RMC | J4 |
| 1 | Resistor | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | 0E1 |
| 12 | D_Zener_Generic | D_MiniMELF | DZ1, DZ2, DZ3, DZ4, DZ5, DZ6, DZ7, DZ8 +4 |
| 2 | M5_bolt_terminal | bolt_terminal_15x14.5mm | H1, H2 |
| 4 | TLP152 | SO-5_4.4x3.6mm_P1.27mm | OC1, OC5, OC9, OC13 |
| 1 | Transformer_1P_1S | EE 55 | T1 |
| 4 | VS-ETU1506 | TO-220-2_Vertical | D1, D2, D3, D4 |
| 5 | D | D_A-405_P7.62mm_Horizontal | D5, D9, D10, D14, D18 |
| 5 | LED_3mm | LED_D3.0mm | D6, D7, D8, D11, D15 |
Show 21 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1.2 mH | EE 55 | L1 |
| 2 | 470uF | CP_Radial_D10.0mm_P5.00mm | C1, C2 |
| 5 | 100nF | C_Disc_D3.0mm_W2.0mm_P2.50mm | C5, C7, C11, C15, C19 |
| 1 | 1nF | C_Disc_D3.0mm_W2.0mm_P2.50mm | C6 |
| 4 | 0.1uF | C_Disc_D3.0mm_W2.0mm_P2.50mm | C8, C10, C13, C16 |
| 1 | Capacitor_NP | C_Disc_D3.0mm_W2.0mm_P2.50mm | C9 |
| 3 | 100uF | CP_Radial_D5.0mm_P2.50mm | C12, C14, C17 |
| 1 | 100uF | C_Disc_D3.0mm_W2.0mm_P2.50mm | C18 |
| 1 | 0.1uF | CP_Radial_D5.0mm_P2.50mm | C20 |
| 2 | CP_Generic | CP_Radial_D35.0mm_P10.00mm_SnapIn | C21, C22 |
| 12 | 10e | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R3, R5, R7, R9, R11, R13, R14 +4 |
| 12 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R4, R6, R8, R10, R12, R15, R16 +4 |
| 5 | 330E | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R25, R29, R45, R57, R69 |
| 4 | 2k2 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R26, R46, R58, R70 |
| 4 | 4E7 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R27, R47, R59, R71 |
| 6 | 1M | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R28, R31, R32, R33, R34, R35 |
| 6 | 1K2 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R30, R50, R51, R52, R53, R56 |
| 7 | 1K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R36, R37, R39, R40, R42, R43, R44 |
| 2 | 11k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R38, R48 |
| 1 | 470E | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R41 |
| 1 | 68E1 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R49 |
KIKAD design files
The KiCad project lives in the MUBARIS-KT/DC-DC_CONVERTER repository on GitHub; these links point at the commit this page was built from.
- LayoutkIKAD/kIKAD.kicad_pcb
- SchematickIKAD/kIKAD.kicad_sch
KIKAD: common questions
How big is the KIKAD PCB?
The KIKAD measures 263.3 × 128 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the KIKAD?
133 components, from 41 distinct parts. The full bill of materials is listed on this page.
Where can I download the KIKAD design files?
From the MUBARIS-KT/DC-DC_CONVERTER repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the KIKAD design in my own project?
The repository has no license, so all rights stay with MUBARIS-KT. Use it as a reference, and ask the author before reusing the design.
