30A Home Automation With ESP32
About the 30A Home Automation With ESP32 PCB
30A Home Automation With ESP32 is an open source ESP32 PCB design by MurilloHorvath, published on GitHub under the MIT license. It is a 2-layer board measuring 82.5 × 73 mm, with 28 components from 17 distinct parts.
Its main chip is the ESP32-WROOM-32, from the ESP32 family. Other key parts include the PC817 and AMS1117-3.3. By type, the board carries 8 resistors, 4 ICs, 4 diodes, 3 connectors, 2 transistors and 2 relays.
From the project
Projetos utilizando o software KiCad
Repositório com proprosito de anexar meus projetos utilizando o software KiCAD
Main components on the 30A Home Automation With ESP32
30A Home Automation With ESP32 bill of materials (BOM)
28 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-WROOM-32 | ESP32-WROOM-32 | U1 |
| 2 | PC817 | DIP-4_W7.62mm | U2, U3 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U4 |
| 2 | S8050 | TO-92_Inline | Q1, Q2 |
| 1 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | Screw_Terminal_01x04 | TerminalBlock_MaiXu_MX126-5.0-04P_1x04_P5.00mm | J2 |
| 1 | Screw_Terminal_01x03 | TerminalBlock_MaiXu_MX126-5.0-03P_1x03_P5.00mm | J3 |
| 1 | RAYEX-L90AS | Relay_SPST_RAYEX-L90AS | K1 |
| 1 | PR13-5V-450-1C | RELAY_PR13-5V-450-1C | K2 |
| 1 | HLK-PM01 | Converter_ACDC_Hi-Link_HLK-PMxx | PS1 |
| 2 | SW_Push | SW_PUSH_6mm | SW1, SW2 |
| 2 | LED | LED_0805_2012Metric | D1, D3 |
| 2 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D2, D4 |
| 1 | 10uF | C_0805_2012Metric | C1 |
| 1 | 22uF | C_0805_2012Metric | C2 |
| 6 | 1K | R_0805_2012Metric | R1, R2, R3, R4, R5, R6 |
| 2 | 10K | R_0805_2012Metric | R7, R8 |
30A Home Automation With ESP32 design files
The KiCad project lives in the MurilloHorvath/KiCad repository on GitHub; these links point at the commit this page was built from.
30A Home Automation With ESP32: common questions
What microcontroller does the 30A Home Automation With ESP32 use?
The 30A Home Automation With ESP32 is built around the ESP32-WROOM-32, from the ESP32 family.
How big is the 30A Home Automation With ESP32 PCB?
The 30A Home Automation With ESP32 measures 82.5 × 73 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 30A Home Automation With ESP32?
28 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the 30A Home Automation With ESP32 design files?
From the MurilloHorvath/KiCad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the 30A Home Automation With ESP32 design in my own project?
Yes, under the terms of its MIT license, which MurilloHorvath chose for the repository.
Can I test firmware for the 30A Home Automation With ESP32 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in KiCad
ESP32ESP
152.2 × 93.3 mm72 parts2LMIT1
Usb to UART Converter
30 × 18 mm19 parts2LMIT1
1-FlightController
20 × 40.8 mm18 parts2LMIT1
Esquema Mod TransformerlessPowerSupply
47.7 × 35.7 mm18 parts2LMIT1
Módulo Buzzer
41.6 × 26.8 mm15 parts2LMIT1
Esquema Mod DCmotorSpeedController
65 × 30 mm15 parts2LMIT1
Esquema Mod BoostConverterV1
45 × 25.2 mm13 parts2LMIT1
Esquema Mod ACtoDCconverter
30.5 × 32.5 mm10 parts2LMIT1
Servo Motor Tester
33 × 28.8 mm10 parts2LMIT1
Esquema Mod DRV8833MotorDriver
22 × 18 mm8 parts2LMIT1
Esquema ReleFarol
31.2 × 15.4 mm6 parts2LMIT1
Similar boards
ESP32Open Book Abridged Edition
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1k
ESP32Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0k
ESP32Esp32 minimal
36.2 × 26.8 mm20 parts2LMIT4.0k
ESP32Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k
ESP32Controller
29 × 74 mm58 parts4LApache-2.03.8k
ESP32Bitaxe
skot
56.5 × 99.8 mm86 parts4LCERN-OHL-S-2.01.4k