Flappy-Bird-Display-Game
musicalruh-glitch·Flappy-Bird-Display-Game
About the Flappy-Bird-Display-Game PCB
Flappy-Bird-Display-Game is an open source ESP32 PCB design by musicalruh-glitch, published on GitHub. It is a 2-layer board measuring 45 × 52.5 mm, with 9 components from 6 distinct parts.
Its main chip is the XIAO-ESP32-S3, from the ESP32 family. By type, the board carries 5 switches, 2 connectors, 1 IC and 1 buzzer.
It belongs with the displays & leds designs in this gallery.
From the project
I'm going to learn how to build my own display and connect it to a PCB and some code or something!
I built a hand held game, the in game name being "Flappy Bird Soul." The game is inspired by Undertale, (like all my other Half Life projects) and it was originally supposed to be a Flappy Bird game, hence the name but it's inspired by the attack patterns in game Undertale, sharing the same sprites and music. All credits for sprites, attack patterns, style, and music go to Toby Fox, this product is not for commercial use, it's for my own leisure, because if they won't make the merch just make it yourself! In any case, go play Undertale, it's awesome :D
Main components on the Flappy-Bird-Display-Game
Flappy-Bird-Display-Game bill of materials (BOM)
9 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-S3 | XIAO ESP32-S3 | U2 |
| 1 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x07 | PinHeader_1x07_P2.54mm_Vertical | J3 |
| 1 | Buzzer | Buzzer_12x9.5RM7.6 | BZ1 |
| 4 | SW_Push | SW_PUSH_6mm_H7.3mm | SW1, SW2, SW3, SW4 |
| 1 | SW_Wuerth_450301014042 | SW_Slide-03_Wuerth-WS-SLTV_10x2.5x6.4_P2.54mm | SW6 |
Flappy-Bird-Display-Game design files
The KiCad project lives in the musicalruh-glitch/Flappy-Bird-Display-Game repository on GitHub; these links point at the commit this page was built from.
Flappy-Bird-Display-Game: common questions
What microcontroller does the Flappy-Bird-Display-Game use?
The Flappy-Bird-Display-Game is built around the XIAO-ESP32-S3, from the ESP32 family.
How big is the Flappy-Bird-Display-Game PCB?
The Flappy-Bird-Display-Game measures 45 × 52.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Flappy-Bird-Display-Game?
9 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Flappy-Bird-Display-Game design files?
From the musicalruh-glitch/Flappy-Bird-Display-Game repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Flappy-Bird-Display-Game design in my own project?
The repository has no license, so all rights stay with musicalruh-glitch. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Flappy-Bird-Display-Game without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k