Ampli de Celda de Carga
About the Ampli de Celda de Carga PCB
Ampli de Celda de Carga is an open source PCB design by MyCloudExample, published on GitHub. It is a 2-layer board measuring 50 × 50 mm, with 19 components from 14 distinct parts.
Other key parts include the LM324. By type, the board carries 9 resistors, 4 connectors, 2 capacitors, 1 IC and 1 diode.
Main components on the Ampli de Celda de Carga
Ampli de Celda de Carga bill of materials (BOM)
19 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM324 | CERDIP-14_W7.62mm_SideBrazed_LongPads | U1 |
| 1 | 12V GND | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Salida | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | ENTRADA | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | REFERENCIA | PinHeader_1x02_P2.54mm_Vertical | J5 |
| 2 | R_Potentiometer | Potentiometer_Vishay_T93YA_Vertical | RV1, RV2 |
| 1 | TL431LP | TO-220-3_Vertical | D1 |
| 1 | C_Polarized | CP_Radial_D4.0mm_P2.00mm | C1 |
| 1 | 0,1uF | C_Disc_D3.0mm_W2.0mm_P2.50mm | C2 |
| 1 | 4k7 | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1 |
| 2 | 2k2 | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2, R3 |
| 4 | 10k | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R4, R5, R7, R9 |
| 1 | 10k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R6 |
| 1 | 8k2 | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R8 |
Ampli de Celda de Carga design files
The KiCad project lives in the MyCloudExample/Kicad_Proyectos repository on GitHub; these links point at the commit this page was built from.
Ampli de Celda de Carga: common questions
How big is the Ampli de Celda de Carga PCB?
The Ampli de Celda de Carga measures 50 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Ampli de Celda de Carga?
19 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the Ampli de Celda de Carga design files?
From the MyCloudExample/Kicad_Proyectos repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Ampli de Celda de Carga design in my own project?
The repository has no license, so all rights stay with MyCloudExample. Use it as a reference, and ask the author before reusing the design.
More boards in Kicad_Proyectos
RP2040/RP2350Placa de Desarrollo
115 × 95 mm44 parts2LNo license1
Oscilador 555
100 × 100 mm40 parts2LNo license1
RP2040/RP2350Placa de desarrollo Pico Zero
91.5 × 101.6 mm39 parts2LNo license1
AMPLIFICADOR DE TERMO J COMPENSADO
115 × 100 mm32 parts2LNo license1
PT100
100 × 100 mm17 parts2LNo license1
FUENTE SIMETRICA DE 12V
100 × 50 mm17 parts2LNo license1
Receptor
50 × 50 mm14 parts2LNo license1
Transmisor
50 × 50 mm14 parts2LNo license1
Parte2
50 × 50 mm9 parts2LNo license1
Linterna Leds
40.1 × 40.1 mm6 parts2LNo license1