AMPLIFICADOR DE TERMO J COMPENSADO
About the AMPLIFICADOR DE TERMO J COMPENSADO PCB
AMPLIFICADOR DE TERMO J COMPENSADO is an open source PCB design by MyCloudExample, published on GitHub. It is a 2-layer board measuring 115 × 100 mm, with 32 components from 22 distinct parts.
Other key parts include the OP07 and LM358. By type, the board carries 13 resistors, 7 capacitors, 4 diodes, 2 ICs and 1 connector.
Main components on the AMPLIFICADOR DE TERMO J COMPENSADO
AMPLIFICADOR DE TERMO J COMPENSADO bill of materials (BOM)
32 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | OP07 | DIP-8_W7.62mm_LongPads | U1 |
| 1 | LM358 | DIP-8_W7.62mm_LongPads | U2 |
| 1 | Sensor_V_Out | TerminalBlock_Altech_AK300-2_P5.00mm | J3 |
| 1 | -15 GND +15 | TerminalBlock_Altech_AK300-3_P5.00mm | Alimentacion1 |
| 1 | 20K | Potentiometer_Trimmer_Vishay_T73XW_Vertical | RV1 |
| 1 | 10K | Potentiometer_Trimmer_Vishay_T73XW_Vertical | RV2 |
| 1 | 1K | Potentiometer_Trimmer_Vishay_T73XW_Vertical | RV3 |
| 1 | Termocupla J | TerminalBlock_Altech_AK300-2_P5.00mm | TC1 |
| 3 | — | D_A-405_P7.62mm_Horizontal | D1, D2, D3 |
| 1 | TL431LP | TO-92_Inline_Narrow_Oval | D4 |
| 3 | 0.1uF | C_Axial_L3.8mm_D2.6mm_P12.50mm_Horizontal | C1, C4, C6 |
| 2 | 100uF | CP_Axial_L10.0mm_D4.5mm_P15.00mm_Horizontal | C2, C5 |
| 2 | 1uF | CP_Axial_L10.0mm_D4.5mm_P15.00mm_Horizontal | C3, C7 |
| 1 | 1M | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 3 | 1K | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2, R5, R6 |
| 1 | 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R3 |
| 1 | 39K | R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R4 |
| 1 | R | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R7 |
| 2 | 18K | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R8, R9 |
| 2 | 10K | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R10, R13 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 75K | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R11 |
| 1 | 4K7 | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R12 |
AMPLIFICADOR DE TERMO J COMPENSADO design files
The KiCad project lives in the MyCloudExample/Kicad_Proyectos repository on GitHub; these links point at the commit this page was built from.
AMPLIFICADOR DE TERMO J COMPENSADO: common questions
How big is the AMPLIFICADOR DE TERMO J COMPENSADO PCB?
The AMPLIFICADOR DE TERMO J COMPENSADO measures 115 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the AMPLIFICADOR DE TERMO J COMPENSADO?
32 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the AMPLIFICADOR DE TERMO J COMPENSADO design files?
From the MyCloudExample/Kicad_Proyectos repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the AMPLIFICADOR DE TERMO J COMPENSADO design in my own project?
The repository has no license, so all rights stay with MyCloudExample. Use it as a reference, and ask the author before reusing the design.
More boards in Kicad_Proyectos
RP2040/RP2350Placa de Desarrollo
115 × 95 mm44 parts2LNo license1
Oscilador 555
100 × 100 mm40 parts2LNo license1
RP2040/RP2350Placa de desarrollo Pico Zero
91.5 × 101.6 mm39 parts2LNo license1
Ampli de Celda de Carga
50 × 50 mm19 parts2LNo license1
PT100
100 × 100 mm17 parts2LNo license1
FUENTE SIMETRICA DE 12V
100 × 50 mm17 parts2LNo license1
Receptor
50 × 50 mm14 parts2LNo license1
Transmisor
50 × 50 mm14 parts2LNo license1
Parte2
50 × 50 mm9 parts2LNo license1
Linterna Leds
40.1 × 40.1 mm6 parts2LNo license1