HardLabs

Placa de desarrollo Pico Zero

MyCloudExample·Kicad_Proyectos·Placa de desarrollo Pico Zero/Placa de desarrollo Pico Zero.kicad_pcb

Placa de desarrollo Pico Zero PCB layout, top view — open source RP2040/RP2350 board by MyCloudExample

About the Placa de desarrollo Pico Zero PCB

Placa de desarrollo Pico Zero is an open source RP2040/RP2350 PCB design by MyCloudExample, published on GitHub. It is a 2-layer board measuring 91.5 × 101.6 mm, with 39 components from 22 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. By type, the board carries 12 connectors, 10 resistors, 4 diodes, 4 capacitors, 2 switches and 1 IC.

Main components on the Placa de desarrollo Pico Zero

RP2040

Placa de desarrollo Pico Zero bill of materials (BOM)

39 components, 22 distinct parts.

QtyPartRefs
1
RP2040
U1
1
BC547
Q1
1
LEFT-MALE
J1
1
RIGHT-MALE
J2
1
DOWN-MALE
J3
1
DOWN-FEMALE
J4
1
LEFT-FEMALE
J5
1
RIGHT-FEMALE
J6
1
USB_A
J7
1
Conn_01x03
J12
1
Conn_01x04
J13
3
Conn_01x01
J14, J15, J16
1
Buzzer
BZ1
4
10k
RV1, RV2, RV3, RV4
2
SW_Push
SW1, SW2
3
LED
D1, D2, D4
1
1N4007
D3
4
0.1uF
C1, C2, C3, C4
4
4K7
R1, R2, R3, R4
3
100
R5, R6, R10
Show 2 more
QtyPartRefs
1
1k
R7
2
10k
R8, R9

Placa de desarrollo Pico Zero design files

The KiCad project lives in the MyCloudExample/Kicad_Proyectos repository on GitHub; these links point at the commit this page was built from.

Placa de desarrollo Pico Zero: common questions

What microcontroller does the Placa de desarrollo Pico Zero use?

The Placa de desarrollo Pico Zero is built around the RP2040, from the RP2040/RP2350 family.

How big is the Placa de desarrollo Pico Zero PCB?

The Placa de desarrollo Pico Zero measures 91.5 × 101.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Placa de desarrollo Pico Zero?

39 components, from 22 distinct parts. The full bill of materials is listed on this page.

Where can I download the Placa de desarrollo Pico Zero design files?

From the MyCloudExample/Kicad_Proyectos repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Placa de desarrollo Pico Zero design in my own project?

The repository has no license, so all rights stay with MyCloudExample. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Placa de desarrollo Pico Zero without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in Kicad_Proyectos

Similar boards