Placa de Desarrollo
About the Placa de Desarrollo PCB
Placa de Desarrollo is an open source RP2040/RP2350 PCB design by MyCloudExample, published on GitHub. It is a 2-layer board measuring 115 × 95 mm, with 44 components from 20 distinct parts.
Its main chip is the RP2350, from the RP2040/RP2350 family. By type, the board carries 18 connectors, 10 resistors, 4 diodes, 3 switches, 3 capacitors and 1 IC.
Main components on the Placa de Desarrollo
Placa de Desarrollo bill of materials (BOM)
44 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RP2350 | BoardF_Pi_Pico_RP2350 | U2 |
| 1 | BC547 | TO-92_Inline | Q1 |
| 1 | USB_A | USB_A_Molex_67643_Horizontal | J1 |
| 1 | LEFT | PinHeader_1x20_P2.54mm_Vertical | J2 |
| 1 | RIGHT | PinHeader_1x20_P2.54mm_Vertical | J3 |
| 3 | Conn_01x01 | PinHeader_1x01_P2.54mm_Vertical | J4, J17, J18 |
| 10 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J5, J6, J7, J9, J10, J12, J13, J14 +2 |
| 2 | Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J8, J11 |
| 1 | Buzzer | Buzzer_12x9.5RM7.6 | BZ1 |
| 3 | 10k | Potentiometer_Piher_T-16H_Single_Horizontal | RV2, RV3, RV4 |
| 1 | RESET | SW_PUSH_6mm | SW1 |
| 1 | PULL DOWN | SW_PUSH_6mm | SW2 |
| 1 | PULL UP | SW_PUSH_6mm | SW3 |
| 1 | 1N4007 | D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 3 | LED | LED_D5.0mm | D2, D3, D4 |
| 3 | 100nF | C_Disc_D8.0mm_W2.5mm_P5.00mm | C1, C2, C3 |
| 4 | 4,7k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2, R3, R4 |
| 2 | 10K | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R5, R6 |
| 1 | 1K | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R7 |
| 3 | 220 | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R8, R9, R10 |
Placa de Desarrollo design files
The KiCad project lives in the MyCloudExample/Kicad_Proyectos repository on GitHub; these links point at the commit this page was built from.
Placa de Desarrollo: common questions
What microcontroller does the Placa de Desarrollo use?
The Placa de Desarrollo is built around the RP2350, from the RP2040/RP2350 family.
How big is the Placa de Desarrollo PCB?
The Placa de Desarrollo measures 115 × 95 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Placa de Desarrollo?
44 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the Placa de Desarrollo design files?
From the MyCloudExample/Kicad_Proyectos repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Placa de Desarrollo design in my own project?
The repository has no license, so all rights stay with MyCloudExample. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Placa de Desarrollo without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in Kicad_Proyectos
Oscilador 555
100 × 100 mm40 parts2LNo license1
RP2040/RP2350Placa de desarrollo Pico Zero
91.5 × 101.6 mm39 parts2LNo license1
AMPLIFICADOR DE TERMO J COMPENSADO
115 × 100 mm32 parts2LNo license1
Ampli de Celda de Carga
50 × 50 mm19 parts2LNo license1
FUENTE SIMETRICA DE 12V
100 × 50 mm17 parts2LNo license1
PT100
100 × 100 mm17 parts2LNo license1
Receptor
50 × 50 mm14 parts2LNo license1
Transmisor
50 × 50 mm14 parts2LNo license1
Parte2
50 × 50 mm9 parts2LNo license1
Linterna Leds
40.1 × 40.1 mm6 parts2LNo license1
Similar boards
RP2040/RP2350Open Book Abridged Edition
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1k
RP2040/RP2350Corne
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7k
RP2040/RP2350Corne
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7k
RP2040/RP2350LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0k
RP2040/RP2350Jitx design
55.5 × 65 mm26 parts4LGPL-3.05.0k
RP2040/RP2350Pro V2
kata0510
290.1 × 130 mm270 parts2LMIT2.3k