Analog filter

Myrto-Angeliki·analog-filter·kicad/analog_filter_module.kicad_pcb

Analog filter PCB layout, top view — open source board by Myrto-Angeliki

About the Analog filter PCB

Analog filter is an open source PCB design by Myrto-Angeliki, published on GitHub under the MIT license. It is a 4-layer board measuring 30 × 40 mm, with 14 components from 11 distinct parts.

Other key parts include the AP2112K-3.3 and MCP6002-XSN. By type, the board carries 5 capacitors, 3 connectors, 3 resistors, 2 ICs and 1 diode.

It belongs with the sensors designs in this gallery.

From the project

A custom 2-layer printed circuit board (PCB) designed in KiCad for sensor signal conditioning in embedded hardware systems.

A custom 2-layer printed circuit board (PCB) designed in KiCad for sensor signal conditioning in embedded hardware systems. This module combines a low-noise $3.3\text{V}$ Low-Dropout (LDO) power regulator with a 2nd-order active Sallen-Key low-pass filter ($f_c \approx 1.06\text{ kHz}$) and a unity-gain buffer stage to attenuate high-frequency noise prior to Analog-to-Digital Converter (ADC) sampling.

Analog filter, from the project README
From the project README

Main components on the Analog filter

Analog filter bill of materials (BOM)

14 components, 11 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AP2112K-3.3
U1
1
MCP6002-XSN
MCP6002-xSN
U2
1
CONN_01X03
Conn_01x03
J1
2
CONN_01X02
Conn_01x02
J2, J3
1
LED
D1
1
1u
C1
1
2.2U
2.2u
C2
2
15N
15n
C3, C4
1
100N
100n
C5
1
1K
R1
2
10K
R2, R3

Analog filter design files

The KiCad project lives in the Myrto-Angeliki/analog-filter repository on GitHub; these links point at the commit this page was built from.

Analog filter: common questions

How big is the Analog filter PCB?

The Analog filter measures 30 × 40 mm, has 4 copper layers and is 1.600198 mm thick.

How many components are on the Analog filter?

14 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Analog filter design files?

From the Myrto-Angeliki/analog-filter repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Analog filter design in my own project?

Yes, under the terms of its MIT license, which Myrto-Angeliki chose for the repository.

Similar boards