43 open source boards using the MCP6002-XSN
Real designs built with the MCP6002-XSN, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Plinkyblack hwmidi jacks
plinkysynth
121.9 × 109.2 mm261 parts4LMIT2214mix
bread-modular
91.4 × 68.6 mm167 parts4LMIT67STM32
Proteus
mck1117
135 × 82.5 mm348 parts4LNo license50ESP32
Monolith
luftaquila
96 × 74.4 mm112 parts2LCustom license43STM32
Plinkyblack hwmidi jacks
ember-labs-io
121.9 × 109.2 mm261 parts4LCC-BY-SA-4.019Daisy hardware v1
rafkhan
50.5 × 128.3 mm110 parts4LNo license9Hellen121vag
rusefi
164 × 118 mm121 parts4LNo license7NXP
AD7124-4-Implementation
fedecastellaro
114.2 × 98.8 mm36 parts2LNo license5AVR/Arduino
Exp control board
Coen-Lab
120.2 × 224.7 mm262 parts4LAGPL-3.03Seed3-DevKit-Pedal
daisyaudio
197 × 100 mm142 parts2LNo license3STM32
QuadMod Components
dchwebb
70.6 × 100 mm121 parts4LNo license3Hellen88bmw
rusefi
160 × 118 mm298 parts4LNo license2Seed3-DevKit-Desktop
daisyaudio
197 × 111 mm230 parts2LNo license2Hellen154hyundai
rusefi
164 × 156 mm201 parts4LNo license1Hellen miata-NA6
rusefi
154 × 159 mm196 parts2LNo license1Hellen miata-NA8
rusefi
154 × 159 mm186 parts2LNo license1Hellen miata-NB1
rusefi
154 × 159 mm185 parts2LNo license1PIC
SimpleDigital
codeandrelax
75 × 78 mm127 parts2LMIT1STM32
GaiForgeWeb-
GaiaForge
104.9 × 78 mm81 parts2LNo license1STM32
Ribbon Controller Main Board
JordanAceto
147.7 × 31.8 mm71 parts4LCC-BY-4.01RISC-V
Dc motor driver adapter
baden
36.2 × 30.4 mm30 parts2LNo license1Hellen72 NB2
rusefi
154 × 159 mm175 parts2LNo license0Microchip SAM
Profane geometry
hearthsinger
61 × 76.2 mm131 parts4LCustom license0AVR/Arduino
DerTempomat
cybaer
40.6 × 109.2 mm67 parts2LNo license0Analog filter
Myrto-Angeliki
30 × 40 mm14 parts4LMIT0RP2040/RP2350
Laser controller
adeboni
30 × 109 mm124 parts2LGPL-3.01PIC
SimpleDigital THT electrolytes
codeandrelax
75 × 78 mm118 parts2LMIT1Shield Arduino
Mateuszworo97
69.6 × 53.3 mm44 parts2LNo license0AVR/Arduino
Temp sensor
Zwackelmann
52.5 × 52.5 mm36 parts2LNo license0ESP32
32bit
bread-modular
30.5 × 68.6 mm62 parts4LMIT67PIC
PT2399 basd Digital Effect Pedal (Time Manipulator)
codeandrelax
75 × 78 mm113 parts4LMIT1RP2040/RP2350
Jukebox
adeboni
70.8 × 108 mm158 parts2LGPL-3.00RP2040/RP2350
Sycamore
tpcarlson
60.1 × 128.5 mm145 parts2LNo license106RP2040/RP2350
16bit
bread-modular
30.5 × 68.6 mm58 parts2LMIT67Bat detector
microresearch
51.6 × 32.4 mm34 parts2LNo license3Imix
bread-modular
30.5 × 68.6 mm58 parts4LMIT67
How designs wire the MCP6002-XSN
Read from the KiCad layouts of 33 open source designs, one per repository: what each pin of the MCP6002-XSN connects to, and the resistors, capacitors and other passives placed on it.
- The V- pin is tied to GND on 30 of 32 designs.
- The V+ pin has a decoupling capacitor on 22 of 32 designs, most often 100 nF.
- The - pins have a series capacitor on 18 of 33 designs, most often 10 µF (then 4.7 nF).
- The GND pin has a series resistor on 17 of 33 designs, most often 100 Ω (then 22 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: Signal 94% |
|
| -pin 2, 6 | Connected to: Signal 80% · not connected 15% |
|
| +pin 3, 5 | Connected to: Signal 63% · GND 22% |
|
| V-pin 4 | Connected to: GND 94% | — |
| S1pin 7 | Connected to: Signal 66% · not connected 31% |
|
| V+pin 8 | Connected to: 3.3V 94% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Plinkyblack hwmidi jacks by plinkysynth, Sycamore by tpcarlson, 16bit by bread-modular and Proteus by mck1117.
The MCP6002-XSN in open source designs
The gallery holds 43 open source boards using the MCP6002-XSN from 33 GitHub repositories; a typical one measures about 75 × 78 mm and carries around 113 components.
60% are two-layer designs, the rest use four layers or more, and 44% carry an open source license.
The most starred is Plinkyblack hwmidi jacks by plinkysynth.
Parts used alongside the MCP6002-XSN
Microcontrollers on boards using the MCP6002-XSN
What boards using the MCP6002-XSN are built for
MCP6002-XSN: common questions
Where can I find a MCP6002-XSN reference design?
Each of the 43 boards on this page is a real design using the MCP6002-XSN. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the MCP6002-XSN V- pin connected?
The V- pin is tied to GND on 30 of 32 designs. Counted from the KiCad layouts of 33 open source designs using the MCP6002-XSN.
What decoupling capacitors do designs use on the MCP6002-XSN V+ pin?
The V+ pin has a decoupling capacitor on 22 of 32 designs, most often 100 nF. Counted from the KiCad layouts of 33 open source designs using the MCP6002-XSN.
How is the MCP6002-XSN - pin connected?
The - pins have a series capacitor on 18 of 33 designs, most often 10 µF (then 4.7 nF). Counted from the KiCad layouts of 33 open source designs using the MCP6002-XSN.
What parts are used alongside the MCP6002-XSN?
The L6205PD, LPS25HB, LIS2DW12TR, MPX4_MAP and TL072 appear in the most repositories here.
Which microcontrollers do boards using the MCP6002-XSN use?
Most are built on AVR/Arduino (6), STM32 (6), RP2040/RP2350 (5) and PIC (3).
How big is a typical board using the MCP6002-XSN?
The median is 75 × 78 mm, and 60% are two-layer designs.
What is the most popular open source board using the MCP6002-XSN?
By GitHub stars, Plinkyblack hwmidi jacks by plinkysynth, with 221 stars.
Can I simulate one of these boards using the MCP6002-XSN before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.