EMG-HW-SigAcq
N-Pulse·EMG-HW-SigAcq·EMG_Amplifier_board/EMG_amplifier.kicad_pcb
About the EMG-HW-SigAcq PCB
EMG-HW-SigAcq is an open source PCB design by N-Pulse, published on GitHub under the CC-BY-4.0 license. It is a 4-layer board measuring 50 × 28 mm, with 55 components from 26 distinct parts.
Other key parts include the LPV821DBVR, INA333XXDGK, TPD2E001DRLR and TLV8542DR. By type, the board carries 22 resistors, 13 capacitors, 7 ICs, 5 connectors, 3 diodes and 2 inductors.
It belongs with the audio designs in this gallery.
From the project
This repository contains all the PCB designs for the EMG bracelet as part of a project semester at EPFL.
This repository contains all the PCB designs for the EMG bracelet as part of a project semester at EPFL.
This work is licensed under a Creative Commons Attribution 4.0 International License.
Main components on the EMG-HW-SigAcq
EMG-HW-SigAcq bill of materials (BOM)
55 components, 26 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | LPV821DBVR | SOT-23-5 | U1, U3, U5, U6 |
| 1 | INA333XXDGK INA333xxDGK | VSSOP-8_3x3mm_P0.65mm | U2 |
| 1 | TPD2E001DRLR | DRL5-L | U7 |
| 1 | TLV8542DR | SOIC127P599X175-8N | U8 |
| 1 | Conn_01x04_Socket | PinSocket_2x02_P2.54mm_Vertical | J1 |
| 1 | Conn_01x04_Pin | PinHeader_2x02_P2.54mm_Vertical | J2 |
| 2 | Conn_01x06_Pin | PinHeader_2x03_P2.54mm_Vertical | J3, J7 |
| 1 | Conn_01x06_Socket | PinSocket_2x03_P2.54mm_Vertical | J4 |
| 2 | E | Electrode_Shape | E1, E3 |
| 1 | ER | Electrode_Shape | E2 |
| 3 | ESD5Z2.5T1G | SOD-523_0P9X1P3_ONS | D1, D2, D3 |
| 2 | L_Ferrite | IND_BLM15_1P05X0P55X0P55_MUR | L1, L2 |
| 2 | 470PF 470pF | C_0603_1608Metric | C1, C2 |
| 1 | 6.8NF 6.8nF | C_0603_1608Metric | C3 |
| 1 | 33NF 33nF | C_0805_2012Metric | C4 |
| 1 | 10NF 10nF | C_0402_1005Metric | C9 |
| 1 | 22NF 22nF | C_0805_2012Metric | C10 |
| 7 | 0.1UF 0.1uF | C_0402_1005Metric | C12, C20, C21, C22, C23, C24, C25 |
| 6 | 10K 10k | R_0402_1005Metric | R1, R2, R31, R32, R33, R34 |
| 2 | 2.2K 2.2k | R_0402_1005Metric | R3, R4 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 330R | R_0402_1005Metric | R5 |
| 4 | 10M | R_0402_1005Metric | R6, R7, R8, R9 |
| 3 | 150K 150k | R_0402_1005Metric | R10, R11, R12 |
| 2 | 100 | R_0402_1005Metric | R13, R14 |
| 2 | 12K 12k | R_0402_1005Metric | R15, R16 |
| 2 | 27K 27k | R_0402_1005Metric | R22, R23 |
EMG-HW-SigAcq design files
The KiCad project lives in the N-Pulse/EMG-HW-SigAcq repository on GitHub; these links point at the commit this page was built from.
EMG-HW-SigAcq: common questions
How big is the EMG-HW-SigAcq PCB?
The EMG-HW-SigAcq measures 50 × 28 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the EMG-HW-SigAcq?
55 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the EMG-HW-SigAcq design files?
From the N-Pulse/EMG-HW-SigAcq repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the EMG-HW-SigAcq design in my own project?
Yes, under the terms of its CC-BY-4.0 license, which N-Pulse chose for the repository.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687