9 open source boards using the TPD2E001DRLR
Real designs built with the TPD2E001DRLR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
NXP
BioAmp v1.1.0
prototipado
120 × 98 mm111 parts2LBSD-3-Clause16STM32
BB3plus mainboard
eez-open
233 × 230.5 mm353 parts4LTAPR-OHL-1.012Hw
eiselekd
65.6 × 19.6 mm172 partsNo license2ESP32
Homectrl v2
jeevan9s
64 × 70.5 mm127 parts4LNo license2NXP
Eeg headset project
lolobernardi
123 × 64.5 mm108 parts2LCustom license0EMG-HW-SigAcq
N-Pulse
50 × 28 mm55 parts4LCC-BY-4.00STM32
Flight data recorder
alexdortiz
57 × 27 mm47 parts4LMIT0ESP32
Homectrl rB
jeevan9s
85.2 × 84.7 mm108 parts4LNo license2ESP32
Phase3-manager
udaravima
100 × 80 mm80 parts2LGPL-3.01
How designs wire the TPD2E001DRLR
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the TPD2E001DRLR connects to, and the resistors, capacitors and other passives placed on it.
- The NC_2 pin is left unconnected on 6 of 8 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VCCpin 1 | Connected to: 3.3V 63% · a signal 38% |
|
| NC_2pin 2 | Connected to: Not connected 75% | — |
| IO1pin 3 | Connected to: A connector 75% |
|
| GNDpin 4 | Connected to: GND 75% | — |
| IO2pin 5 | Connected to: A connector 88%, the microcontroller 25% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include BioAmp v1.1.0 by prototipado, BB3plus mainboard by eez-open, Hw by eiselekd and Homectrl rB by jeevan9s.
The TPD2E001DRLR in open source designs
The gallery holds 9 open source boards using the TPD2E001DRLR from 8 GitHub repositories; a typical one measures about 85.2 × 70.5 mm and carries around 108 components.
63% use four copper layers or more, and 56% carry an open source license.
The most starred is BioAmp v1.1.0 by prototipado.
Parts used alongside the TPD2E001DRLR
What boards using the TPD2E001DRLR are built for
TPD2E001DRLR: common questions
Where can I find a TPD2E001DRLR reference design?
Each of the 9 boards on this page is a real design using the TPD2E001DRLR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TPD2E001DRLR NC_2 pin connected?
The NC_2 pin is left unconnected on 6 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the TPD2E001DRLR.
What parts are used alongside the TPD2E001DRLR?
The ADS1299, AP2112K-3.3TRG1 and TPD4E001DRLR appear in the most repositories here.
Which microcontrollers do boards using the TPD2E001DRLR use?
Most are built on ESP32 (3), NXP (2) and STM32 (2).
How big is a typical board using the TPD2E001DRLR?
The median is 85.2 × 70.5 mm, and 38% are two-layer designs.
What is the most popular open source board using the TPD2E001DRLR?
By GitHub stars, BioAmp v1.1.0 by prototipado, with 16 stars.
Can I simulate one of these boards using the TPD2E001DRLR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.