2 open source boards using the TLP627-2

Real designs built with the TLP627-2, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The TLP627-2 in open source designs

The gallery holds 2 open source boards using the TLP627-2 from 2 GitHub repositories; a typical one measures about 105 × 92.2 mm and carries around 49 components.

100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is Iz1glg yaacw keyer by federicobriata.

Microcontrollers on boards using the TLP627-2

TLP627-2: common questions

Where can I find a TLP627-2 reference design?

Each of the 2 boards on this page is a real design using the TLP627-2. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the TLP627-2 use?

Most are built on AVR/Arduino (1).

How big is a typical board using the TLP627-2?

The median is 105 × 92.2 mm, and 100% are two-layer designs.

What is the most popular open source board using the TLP627-2?

By GitHub stars, Iz1glg yaacw keyer by federicobriata, with 7 stars.

Can I simulate one of these boards using the TLP627-2 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part