10 open source boards using the NUCLEO-F303K8

Real designs built with the NUCLEO-F303K8, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

10 boardsClear filters|Most starred

How designs wire the NUCLEO-F303K8

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the NUCLEO-F303K8 connects to, and the resistors, capacitors and other passives placed on it.

  • The AREF pins is left unconnected on 7 of 8 designs.
  • The NRST_1 pin is left unconnected on 4 of 4 designs.
  • The PF1 pin is left unconnected on 4 of 5 designs.
  • The PB4 pin is left unconnected on 4 of 5 designs.
GNDpin 1.4, 2.2, 4, 29Connected to: GND 75%
NRSTpin 3, 28Connected to: Not connected 83% · a signal 17%
PA10pin 3_2Connected to: Not connected 60% · a signal 40%
NRST_1pin 3_3Connected to: Not connected 100%
GND_1pin 3_4Connected to: GND 100%
PB1pin 3_9Connected to: Signal 60% · not connected 40%
  • Capacitor to GND on 40% · 100 nF (1), 10 nF (1)
PF0pin 3_10Connected to: Not connected 60% · a signal 40%
PF1pin 3_11Connected to: Not connected 80% · a signal 20%
PB5pin 3_14Connected to: Not connected 60% · a signal 40%
PB4pin 3_15Connected to: Not connected 80% · a signal 20%
GND_2pin 4_2Connected to: GND 100%
NRST_2pin 4_3Connected to: Not connected 100%
PA2pin 4_5Connected to: Not connected 80% · a signal 20%
PA7pin 4_6Connected to: Not connected 60% · VBAT_MAIN 20% · a signal 20%
PA6pin 4_7Connected to: Not connected 80% · a signal 20%
PA5pin 4_8Connected to: Not connected 60% · a signal 40%
PA1pin 4_11Connected to: A connector 40% · not connected 40%
  • Capacitor to GND on 40% · 100 nF (1), 10 nF (1)
PA0pin 4_12Connected to: Not connected 60% · VBAT_3 20% · a signal 20%
AREFpin 4_13, 18Connected to: Not connected 88%
+3V3pin 4_14Connected to: 3.3V 75% · not connected 25%
PB3pin 4_15Connected to: Not connected 80% · a signal 20%
PF_0pin 10Connected to: Not connected 67% · a signal 33%
3V3pin 17Connected to: 3.3V 67% · a signal 33%
PA_3pin 21Connected to: Not connected 67% · a signal 33%
PA_7pin 25Connected to: Not connected 67% · a signal 33%
PA_2pin 26Connected to: Not connected 67% · a signal 33%

30 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Lumber plunder metal detector by bobasaurus, 2022NHK Con follow by nalinally, Pcb robot ares by AresEnsea and Herkulex by Achille-92.

The NUCLEO-F303K8 in open source designs

The gallery holds 10 open source boards using the NUCLEO-F303K8 from 8 GitHub repositories; a typical one measures about 68 × 78.5 mm and carries around 20 components.

90% are two-layer designs, the rest use four layers or more, and 10% carry an open source license.

The most starred is Lumber plunder metal detector by bobasaurus.

Parts used alongside the NUCLEO-F303K8

What boards using the NUCLEO-F303K8 are built for

NUCLEO-F303K8: common questions

Where can I find a NUCLEO-F303K8 reference design?

Each of the 10 boards on this page is a real design using the NUCLEO-F303K8. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the NUCLEO-F303K8 AREF pin connected?

The AREF pins is left unconnected on 7 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the NUCLEO-F303K8.

How is the NUCLEO-F303K8 NRST_1 pin connected?

The NRST_1 pin is left unconnected on 4 of 4 designs. Counted from the KiCad layouts of 8 open source designs using the NUCLEO-F303K8.

How is the NUCLEO-F303K8 PF1 pin connected?

The PF1 pin is left unconnected on 4 of 5 designs. Counted from the KiCad layouts of 8 open source designs using the NUCLEO-F303K8.

How big is a typical board using the NUCLEO-F303K8?

The median is 68 × 78.5 mm, and 90% are two-layer designs.

What is the most popular open source board using the NUCLEO-F303K8?

By GitHub stars, Lumber plunder metal detector by bobasaurus, with 11 stars.

Can I simulate one of these boards using the NUCLEO-F303K8 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part