AKBONE2022

nanbuwks·AKBONE2022·PCB/LEDPanelKit.kicad_pcb

AKBONE2022 PCB layout, top view — open source ESP32 board by nanbuwks

About the AKBONE2022 PCB

AKBONE2022 is an open source ESP32 PCB design by nanbuwks, published on GitHub under the CC0-1.0 license. It is a 2-layer board measuring 96 × 128 mm, with 31 components from 24 distinct parts.

Its main chip is the ESP32_DEVKITC, from the ESP32 family. Other key parts include the SEEED_GROVE, MPU-6500_Module, GY-BMP_E280, RTC_PCF8563module and ESP32_DEVKIT_V1. By type, the board carries 10 ICs, 6 resistors, 5 connectors, 3 jumpers, 3 capacitors and 1 buzzer.

From the project

秋葉原ロボット部のトレーニングボード。 2022リリースはLEDパネルキットです。

秋葉原ロボット部のトレーニングボード。 2022リリースはLEDパネルキットです。

初期コンセプトとAlpha版の説明 「AKBONE2022 で LED パネルを使ったオープンソーストレーニングキットを考える」 https://qiita.com/nanbuwks/items/5271dedf196623d452a0

AVTOKYO2022で頒布したBeta1版の説明 「LEDパネルキットAKBONE2022で楽しもう! Beta1版」 https://qiita.com/nanbuwks/items/4317031bdf3bdcfafbf8

AKBONE2022の開発環境構築 「LEDパネルキット AKBONE2022 の環境構築を自分でやってみる https://qiita.com/nanbuwks/items/d4523ebfb9cabdae90c5

Main components on the AKBONE2022

ESP32_DEVKITCSEEED_GROVEMPU-6500_ModuleGY-BMP_E280RTC_PCF8563moduleESP32_DEVKIT_V1LM386Module_TaobaoHUB75LicheePiNano_1.27microSD_SPI_Module

AKBONE2022 bill of materials (BOM)

31 components, 24 distinct parts.

QtyPartRefs
1
ESP32_DEVKITC
U1
1
SEEED_GROVE
U2
1
MPU-6500_Module
U3
1
GY-BMP_E280
U4
1
RTC_PCF8563module
U5
1
ESP32_DEVKIT_V1
U6
1
LM386Module_Taobao
U7
1
HUB75
U8
1
LicheePiNano_1.27
U9
1
microSD_SPI_Module
U10
1
Conn_01x02_RESET
J1
1
Conn_01x04_Debug
J2
1
Conn_01x05_POWER_IN
J3
2
Screw_Terminal_01x02
J4, J5
1
Buzzer
BZ1
2
Jumper_NC_Dual
JP1, JP2
1
Jumper
JP3
1
Speaker
LS1
1
SW_Push
SW2
1
LED
D1
Show 4 more
QtyPartRefs
2
0.1uF
C1, C2
1
330uF
C3
1
330
R1
5
10k
R2, R3, R4, R5, R6

AKBONE2022 design files

The KiCad project lives in the nanbuwks/AKBONE2022 repository on GitHub; these links point at the commit this page was built from.

AKBONE2022: common questions

What microcontroller does the AKBONE2022 use?

The AKBONE2022 is built around the ESP32_DEVKITC, from the ESP32 family.

How big is the AKBONE2022 PCB?

The AKBONE2022 measures 96 × 128 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the AKBONE2022?

31 components, from 24 distinct parts. The full bill of materials is listed on this page.

Where can I download the AKBONE2022 design files?

From the nanbuwks/AKBONE2022 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the AKBONE2022 design in my own project?

Yes, under the terms of its CC0-1.0 license, which nanbuwks chose for the repository.

Can I test firmware for the AKBONE2022 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards