Ozone12864
nanbuwks·ozone12864·KiCad/ozone12864.kicad_pcb
About the Ozone12864 PCB
Ozone12864 is an open source ESP32 PCB design by nanbuwks, published on GitHub. It is a 2-layer board measuring 70.1 × 138 mm, with 54 components from 35 distinct parts.
Its main chip is the ESP-WROOM-32, from the ESP32 family. Other key parts include the JLX12864G-LCD, NJM2845DL1-33 and DCDC Up/Down. By type, the board carries 17 resistors, 12 capacitors, 9 connectors, 4 ICs, 4 switches and 3 diodes.
From the project
ESP32 ozone meater with LCD JLX12864G-332-BN
ESP32 ozone meater with LCD JLX12864G-332-BN
Potentiostat method. see: https://qiita.com/nanbuwks/items/b0f3cb8982ab1c29c718

Main components on the Ozone12864
Ozone12864 bill of materials (BOM)
54 components, 35 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP-WROOM-32 | ESP-WROOM-32 | U1 |
| 1 | JLX12864G-LCD | JLX12864G_128x64_2.11in_LCD_Module | U2 |
| 1 | NJM2845DL1-33 | TO-252-2 | U5 |
| 1 | DCDC Up/Down | TPS63020_Module_Both_Strawberrylinux_Taobao | U6 |
| 1 | Q_NMOS_GSD | TO-252-2 | Q1 |
| 1 | IRF7317TRPBF Si4542DY | SO-8_5.3x6.2mm_P1.27mm | Q3 |
| 1 | DCJACK | DCJACK | J1 |
| 1 | DEBUG | PinHeader_1x10_P2.54mm_Vertical | J2 |
| 1 | Conn_01x08_Female | PinHeader_1x08_P2.54mm_Vertical | J3 |
| 1 | USBSERIAL | PinSocket_1x06_P2.54mm_Horizontal | J5 |
| 1 | Conn_01x13_Female | PinHeader_1x13_P2.54mm_Vertical | J7 |
| 1 | Conn_01x13_Male | PinSocket_1x13_P2.54mm_Horizontal | J9 |
| 1 | CONN_01X13_FEMALE Conn_01x13_Female | PinHeader_1x13_P2.54mm_Vertical | J11 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J12 |
| 1 | SD_CARD_MODULE | PinHeader_1x06_P2.54mm_Vertical | J13 |
| 1 | Battery | JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | BT1 |
| 1 | Buzzer | MagneticBuzzer_ProSignal_ABI-010-RC | BZ1 |
| 1 | Jumper_NC_Small | SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP4 |
| 1 | SW_DPST | 5.8x5.8_7.0x7.0_8.5x8.5_SWITCH_EDGEMOUNT | SW2 |
| 1 | A | SW_PUSH_6mm | SW3 |
Show 15 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | B | SW_PUSH_6mm | SW4 |
| 1 | OK | SW_PUSH_6mm | SW5 |
| 2 | D_Schottky | D_SOD-123 | D1, D2 |
| 1 | LED | LED_D3.0mm | D3 |
| 2 | CP | CP_Radial_D5.0mm_P2.00mm | C1, C2 |
| 3 | 10U 10u | C_0603_1608Metric | C3, C7, C10 |
| 3 | 0.1U 0.1u | C_0603_1608Metric | C4, C5, C11 |
| 1 | 20P 20p | C_0603_1608Metric | C6 |
| 2 | 220uF | CP_Radial_D5.0mm_P2.00mm | C8, C12 |
| 1 | 10UF 10uF | C_0603_1608Metric | C9 |
| 5 | 10K 10k | R_0603_1608Metric | R1, R9, R12, R14, R17 |
| 6 | 510K 510k | R_0603_1608Metric | R2, R3, R4, R5, R6, R7 |
| 4 | 1k | R_0603_1608Metric | R8, R10, R11, R13 |
| 1 | 75 | R_0603_1608Metric | R15 |
| 1 | 270-1K 270-1k | R_0603_1608Metric | R16 |
Ozone12864 design files
The KiCad project lives in the nanbuwks/ozone12864 repository on GitHub; these links point at the commit this page was built from.
Ozone12864: common questions
What microcontroller does the Ozone12864 use?
The Ozone12864 is built around the ESP-WROOM-32, from the ESP32 family.
How big is the Ozone12864 PCB?
The Ozone12864 measures 70.1 × 138 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Ozone12864?
54 components, from 35 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Ozone12864 design files?
From the nanbuwks/ozone12864 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Ozone12864 design in my own project?
The repository has no license, so all rights stay with nanbuwks. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Ozone12864 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k