11 open source boards using the NJM2845DL1-33

Real designs built with the NJM2845DL1-33, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

11 boardsClear filters|Most starred

How designs wire the NJM2845DL1-33

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the NJM2845DL1-33 connects to, and the resistors, capacitors and other passives placed on it.

  • The OUT pin is tied to 3.3V on 6 of 7 designs.
GNDpin 2Connected to: GND 100%
OUTpin 3Connected to: 3.3V 86%

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include NERD-HPC by TTtensan, Im920sltoDS4 by boiled-mackerel, Ground by extsui and Ozone12864 by nanbuwks.

The NJM2845DL1-33 in open source designs

The gallery holds 11 open source boards using the NJM2845DL1-33 from 7 GitHub repositories; a typical one measures about 100 × 72 mm and carries around 69 components.

91% are two-layer designs, the rest use four layers or more, and 27% carry an open source license.

The most starred is NERD-HPC by TTtensan.

Microcontrollers on boards using the NJM2845DL1-33

What boards using the NJM2845DL1-33 are built for

NJM2845DL1-33: common questions

Where can I find a NJM2845DL1-33 reference design?

Each of the 11 boards on this page is a real design using the NJM2845DL1-33. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the NJM2845DL1-33 OUT pin connected?

The OUT pin is tied to 3.3V on 6 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the NJM2845DL1-33.

Which microcontrollers do boards using the NJM2845DL1-33 use?

Most are built on STM32 (6), ESP32 (3) and RP2040/RP2350 (1).

How big is a typical board using the NJM2845DL1-33?

The median is 100 × 72 mm, and 91% are two-layer designs.

What is the most popular open source board using the NJM2845DL1-33?

By GitHub stars, NERD-HPC by TTtensan, with 2 stars.

Can I simulate one of these boards using the NJM2845DL1-33 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part