QuinoaChipPlant
nanbuwks·QuinoaChipPlant·KiCad/QuinoaChipPlant.kicad_pcb
About the QuinoaChipPlant PCB
QuinoaChipPlant is an open source ESP32 PCB design by nanbuwks, published on GitHub. It is a 2-layer board measuring 180 × 250 mm, with 87 components from 28 distinct parts.
Its main chip is the ESP32_DEVKIT_V1, from the ESP32 family. Other key parts include the SPARKFUN_TB6612FNG_MOTOR_DRIVER_MODULE, SEEED_GROVE and CR2013-MI2120. By type, the board carries 20 diodes, 19 resistors, 18 connectors, 17 capacitors, 9 ICs and 1 buzzer.
From the project
キヌア( Quinua ):南米で食されている雑穀。 栄養的に優れていて、スーパーフードとして注目されている。 乾燥/湿地、低温、塩地などの他の作物が育たない環境でも栽培ができる。 遺伝子が多様で、品種改良が期待される。
キヌア( Quinua ):南米で食されている雑穀。 栄養的に優れていて、スーパーフードとして注目されている。 乾燥/湿地、低温、塩地などの他の作物が育たない環境でも栽培ができる。 遺伝子が多様で、品種改良が期待される。
1つのチップに1粒ずつ撒種し、水耕栽培を行います。 1つのラックにチップが24収納できますが、チップ1つ分はセンサーのために使うので1つのラックで23粒を撒きます。 芽が出たら1つのラックに10程度に間引きします。 100ラックで実験するとなると、1000株を育成することになります。 収量を目的とするのではなく、促成で種を回収することを目的としています。
水換え、光照射、センサ接続ができるロボットボードです。 1000株分を育成するのは水替えも大変なので、自動で水換えを行います。 プログラムで自動運転できるので、一時冠水を繰り返すような運転を行うことができます。
Main components on the QuinoaChipPlant
QuinoaChipPlant bill of materials (BOM)
87 components, 28 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32_DEVKIT_V1 | ESP32_DEVKIT_V1 | U1 |
| 5 | SPARKFUN_TB6612FNG_MOTOR_DRIVER_MODULE SparkFun_TB6612FNG_MOTOR_DRIVER_MODULE | SparkFun_TB6612FNG_MOTOR_DRIVER_MODULE | U2, U3, U4, U6, U8 |
| 1 | SEEED_GROVE | Seeedstudio_Grove_110990030_Vertical_4pin_2mmpitch | U5 |
| 1 | CR2013-MI2120 | TFT3.2_ILI9341 | U7 |
| 1 | ~ | YRB_YMD-10WR3_YRA_YMD-10WR3 | U9 |
| 2 | GROVE | JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J1, J18 |
| 1 | DCJACK | DCJACK | J2 |
| 1 | LEVEL1 | JST_XH_B4B-XH-AM_1x04_P2.50mm_Vertical | J3 |
| 2 | Screw_Terminal_01x04 | TerminalBlock_Phoenix_PT-1,5-4-5.0-H_1x04_P5.00mm_Horizontal | J4, J20 |
| 2 | MOTOR | JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | J5, J6 |
| 6 | BULB | JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | J7, J8, J9, J10, J15, J16 |
| 1 | LEVEL2 | JST_XH_B4B-XH-AM_1x04_P2.50mm_Vertical | J11 |
| 1 | LEVEL3 | JST_XH_B4B-XH-AM_1x04_P2.50mm_Vertical | J12 |
| 1 | LEVEL4 | JST_XH_B4B-XH-AM_1x04_P2.50mm_Vertical | J13 |
| 1 | DCJACK OPTIONAL | DCJACK | J14 |
| 1 | Buzzer | Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | SolderJumper_2_Bridged | SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP3 |
| 1 | SW_Push | SW_PUSH_6mm | SW1 |
| 1 | Thermistor | TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | TH1 |
| 10 | D | D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D10 +2 |
Show 8 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 10 | LED | LED_D3.0mm | D8, D9, D12, D13, D14, D15, D16, D17 +2 |
| 2 | C | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C3 |
| 3 | C_Polarized | CP_Radial_D10.0mm_P2.50mm_P5.00mm | C2, C4, C15 |
| 1 | 0.1UF 0.1uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C5 |
| 11 | C | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | C6, C7, C8, C9, C10, C11, C12, C13 +3 |
| 1 | R | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 14 | 470 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R4, R5, R6, R11, R12, R13, R14 +6 |
| 4 | 10K | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R7, R8, R9, R10 |
QuinoaChipPlant design files
The KiCad project lives in the nanbuwks/QuinoaChipPlant repository on GitHub; these links point at the commit this page was built from.
QuinoaChipPlant: common questions
What microcontroller does the QuinoaChipPlant use?
The QuinoaChipPlant is built around the ESP32_DEVKIT_V1, from the ESP32 family.
How big is the QuinoaChipPlant PCB?
The QuinoaChipPlant measures 180 × 250 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the QuinoaChipPlant?
87 components, from 28 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the QuinoaChipPlant design files?
From the nanbuwks/QuinoaChipPlant repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the QuinoaChipPlant design in my own project?
The repository has no license, so all rights stay with nanbuwks. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the QuinoaChipPlant without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k