31 open source boards using the CR2013-MI2120

Real designs built with the CR2013-MI2120, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

31 boardsClear filters|Most starred

How designs wire the CR2013-MI2120

Read from the KiCad layouts of 20 open source designs, one per repository: what each pin of the CR2013-MI2120 connects to, and the resistors, capacitors and other passives placed on it.

  • The FLASH_CD_14 pin is left unconnected on 14 of 18 designs (a signal on 3).
  • The SD_MOSI_11 pin is left unconnected on 12 of 18 designs (a signal on 6).
  • The SD_MISO_12 pin is left unconnected on 12 of 18 designs (a signal on 6).
  • The SD_SCK_13 pin is left unconnected on 12 of 18 designs (a signal on 6).
VCC_1pin 1Connected to: 3.3V 85% · a signal 15%
GND_2pin 2Connected to: GND 95%
SD_CS_10pin 10Connected to: Not connected 61% · a signal 39%
SD_MOSI_11pin 11Connected to: Not connected 67% · a signal 33%
SD_MISO_12pin 12Connected to: Not connected 67% · a signal 33%
SD_SCK_13pin 13Connected to: Not connected 67% · a signal 33%
FLASH_CD_14pin 14Connected to: Not connected 78% · a signal 17%

7 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Heimdall by modern-hobbyist, Sigyn by wimblerobotics, Kiki player by alaotach and PicoTracker th pcb by alexbonhomme.

The CR2013-MI2120 in open source designs

The gallery holds 31 open source boards using the CR2013-MI2120 from 22 GitHub repositories; a typical one measures about 104.3 × 99.3 mm and carries around 57 components.

79% are two-layer designs, the rest use four layers or more, and 52% carry an open source license.

The most starred is Mist by modern-hobbyist.

Microcontrollers on boards using the CR2013-MI2120

CR2013-MI2120: common questions

Where can I find a CR2013-MI2120 reference design?

Each of the 31 boards on this page is a real design using the CR2013-MI2120. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the CR2013-MI2120 FLASH_CD_14 pin connected?

The FLASH_CD_14 pin is left unconnected on 14 of 18 designs (a signal on 3). Counted from the KiCad layouts of 20 open source designs using the CR2013-MI2120.

How is the CR2013-MI2120 SD_MOSI_11 pin connected?

The SD_MOSI_11 pin is left unconnected on 12 of 18 designs (a signal on 6). Counted from the KiCad layouts of 20 open source designs using the CR2013-MI2120.

How is the CR2013-MI2120 SD_MISO_12 pin connected?

The SD_MISO_12 pin is left unconnected on 12 of 18 designs (a signal on 6). Counted from the KiCad layouts of 20 open source designs using the CR2013-MI2120.

What parts are used alongside the CR2013-MI2120?

The AP2112K-3.3, TP4056-42-ESOP8, AMS1117-3.3, CP2102N-Axx-xQFN24 and ESP32-S3-WROOM-1 appear in the most repositories here.

Which microcontrollers do boards using the CR2013-MI2120 use?

Most are built on ESP32 (13), STM32 (9), NXP (2) and AVR/Arduino (1).

How big is a typical board using the CR2013-MI2120?

The median is 104.3 × 99.3 mm, and 79% are two-layer designs.

What is the most popular open source board using the CR2013-MI2120?

By GitHub stars, Mist by modern-hobbyist, with 27 stars.

Can I simulate one of these boards using the CR2013-MI2120 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part