Starbie remixed
naran-579·Starbie-remixed·CAD/kicad/Starbie.kicad_pcb
About the Starbie remixed PCB
Starbie remixed is an open source ESP32 PCB design by naran-579, published on GitHub. It is a 2-layer board measuring 152.4 × 139.7 mm, with 15 components from 14 distinct parts.
Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. Other key parts include the DHT11. By type, the board carries 4 resistors, 3 connectors, 3 switches, 2 ICs, 2 diodes and 1 fuse.
From the project
Modified version of hack club's Starbie starter project
- Changed shape from blocky to smooth and sharp - Had to rearrange the components to better wire it - Much more "unique" wiring layout (this is my first time doing this ok) - A BATTERY!!!!!!!!! - AN LED!!!! - Temperature now impacts the starbie more
Rapid blinks = BATTERY VERY LOW. Off = Sleep mode. Two quick blinks every 2 seconds = Battery low. one blink every 4 secs = starbie napping :D. SOlid on = Just after play/pet. Three quick blinks every 3 secs = Starbie is hot. A stutter and a pause every 3 secs = Starbie is cold. A blink every 3 seconds = Starbie is happy. A blink every 6 secs =…
Main components on the Starbie remixed
Starbie remixed bill of materials (BOM)
15 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-C3-SMD | XIAO-ESP32-C6-DIP | U1 |
| 1 | DHT11 | Aosong_DHT11_5.5x12.0_P2.54mm | U2 |
| 1 | CONN_01X04_PIN Conn_01x04_Pin | Display_128x64_096_I2C | J1 |
| 1 | CONN_01X08_PIN Conn_01x08_Pin | PinHeader_1x08_P2.54mm_Vertical | J2 |
| 1 | CONN_01X02 Conn_01x02 | BatteryHolder_TruPower_BH-331P_3xAA | J3 |
| 1 | Polyfuse | Fuse_1812_4532Metric | F1 |
| 2 | SW_Push | SW_Cherry_MX_1.00u_PCB | SW1, SW2 |
| 1 | SW_SPDT | PinHeader_1x03_P2.54mm_Vertical | SW3 |
| 1 | D_Schottky | D_DO-41_SOD81_P7.62mm_Horizontal | D1 |
| 1 | LED | LED_D5.0mm | D2 |
| 1 | 10K 10k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | 100K 100k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2 |
| 1 | 47K 47k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R3 |
| 1 | 330 | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R4 |
Starbie remixed design files
The KiCad project lives in the naran-579/Starbie-remixed repository on GitHub; these links point at the commit this page was built from.
Starbie remixed: common questions
What microcontroller does the Starbie remixed use?
The Starbie remixed is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.
How big is the Starbie remixed PCB?
The Starbie remixed measures 152.4 × 139.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Starbie remixed?
15 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Starbie remixed design files?
From the naran-579/Starbie-remixed repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Starbie remixed design in my own project?
The repository has no license, so all rights stay with naran-579. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Starbie remixed without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k