Starbie
natures-bongus-time·starbie·Starbie/Starbie.kicad_pcb
About the Starbie PCB
Starbie is an open source ESP32 PCB design by natures-bongus-time, published on GitHub. It is a 2-layer board measuring 114 × 128.5 mm, with 10 components from 8 distinct parts.
Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. Other key parts include the DHT11. By type, the board carries 3 connectors, 3 resistors, 2 ICs and 2 switches.
It belongs with the sensors and keyboards designs in this gallery.
From the project
Starbie is a tiny motion-controlled digital pet ## What it is
Starbie is a tiny motion-controlled digital pet ## What it is
It's a tamagotchi-like pet that has two keys, a screen and a temperature and humidity sensor, and it's based off of a starboy
This project was created for my week 1 beginner project for half-life! I chose it because I'm super new to hardware, so the project guide was super helpful. I wanted to learn how to make projects like this because it's a new and interesting challenge that is super engaging for me, and I had a lot of fun with it.
Main components on the Starbie
Starbie bill of materials (BOM)
10 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-C3-SMD | XIAO-ESP32-C6-DIP | U1 |
| 1 | DHT11 | Aosong_DHT11_5.5x12.0_P2.54mm | U2 |
| 1 | Conn_01x04_Pin | Display_128x64_096_I2C | J1 |
| 1 | Conn_01x08_Pin | PinHeader_1x08_P2.54mm_Vertical | J2 |
| 1 | USB_C_Receptacle_USB2.0_14P | USB_C_Receptacle_HRO_TYPE-C-31-M-17 | J3 |
| 2 | SW_Push | SW_Cherry_MX_1.00u_PCB | SW1, SW2 |
| 1 | 10K | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 2 | 5k | DIP-8_W7.62mm | R2, R3 |
Starbie design files
The KiCad project lives in the natures-bongus-time/starbie repository on GitHub; these links point at the commit this page was built from.
- LayoutStarbie/Starbie.kicad_pcb
- SchematicStarbie/Starbie.kicad_sch
Starbie: common questions
What microcontroller does the Starbie use?
The Starbie is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.
How big is the Starbie PCB?
The Starbie measures 114 × 128.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Starbie?
10 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Starbie design files?
From the natures-bongus-time/starbie repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Starbie design in my own project?
The repository has no license, so all rights stay with natures-bongus-time. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Starbie without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k