HardLabs

Rx n

ne9n·RC_6m·KiCad_Projects/RX_50MHz_SDR/rx_n/rx_n.kicad_pcb

Rx n PCB layout, top view — open source board by ne9n

About the Rx n PCB

Rx n is an open source PCB design by ne9n, published on GitHub. It is a 2-layer board measuring 6 × 4.7 mm, with 3 components from 3 distinct parts.

Other key parts include the Si5351A and AP2112K-3.3. By type, the board carries 2 ICs and 1 connector.

It belongs with the rf & radio and power & battery designs in this gallery.

From the project

This project focuses on designing and building a modern 50MHz (6-meter) radio control system using the amateur radio bands. It features a high-power 1W transmitter and a high-sensitivity receiver, integrated into a vintage Kraft 7 transmitter case with a modern digital encoder.

Main components on the Rx n

Si5351AAP2112K-3.3

Rx n bill of materials (BOM)

3 components, 3 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
Si5351A
Qorvo
U4
1
AP2112K-3.3
Infineon
U5
1
Servo_1
J1

Rx n design files

The KiCad project lives in the ne9n/RC_6m repository on GitHub; these links point at the commit this page was built from.

Rx n: common questions

How big is the Rx n PCB?

The Rx n measures 6 × 4.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Rx n?

3 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Rx n design files?

From the ne9n/RC_6m repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Rx n design in my own project?

The repository has no license, so all rights stay with ne9n. Use it as a reference, and ask the author before reusing the design.

More boards in RC_6m

Similar boards