19 open source boards using the SI5351A
Real designs built with the SI5351A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
RFBitBangSMT
profdc9
152 × 88 mm263 parts2LNo license221STM32
VNA
profdc9
100 × 85 mm178 parts2LNo license92Panelized
kholia
95.4 × 92.4 mm12 parts2LCustom license30MSI001
ATmega8
99 × 69 mm168 parts2LMIT25OpenBeacon2
etherkit
100 × 80 mm74 parts2LNo license15STM32
Generator 5351 rect sine
MR-DOS
102.4 × 102.4 mm280 parts2LGPL-3.06STM32
Dodekaedri
e-xla
76.2 × 76.2 mm225 parts4LNo license2PIC
ODR-1 OSC & MIXER BOARD
N7IFC
144.8 × 100 mm265 parts4LNo license1TDCS driver old
Fijee-Project
149.9 × 99.1 mm99 parts3LNo license0AVR/Arduino
7mhz ssb trx
ngs
84.5 × 93.4 mm82 parts2LNo license0AVR/Arduino
RFBitBanger
profdc9
152 × 88 mm226 parts2LNo license221Adafruit Si5351A
kholia
30.5 × 21.6 mm6 parts2LCustom license30AVR/Arduino
SDR SSB
kholia
85.1 × 71.7 mm70 parts2LNo license15TDCS driver
Fijee-Project
149.9 × 99.1 mm92 parts2LNo license0AVR/Arduino
RFBitBangerNano
profdc9
152 × 88 mm209 parts2LNo license221NEMA0183
joemadeus
50.8 × 27.7 mm51 parts2LNo license1.kicad
Fijee-Project
63.5 × 63.5 mm84 parts4LNo license0Rx n
ne9n
6 × 4.7 mm3 parts2LNo license0STM32
Dspod u3c5
emeb
26.4 × 41.7 mm49 parts4LMIT10
How designs wire the SI5351A
Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the SI5351A connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 10 of 13 designs, most often 100 nF (then 10 µF).
- The VDDO pin has a decoupling capacitor on 10 of 13 designs, most often 100 nF (then 10 µF).
- The XA pin has a crystal on 9 of 13 designs, most often 25 MHz.
- The XB pin has a crystal on 9 of 13 designs, most often 25 MHz.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDDpin 1 | Connected to: 3.3V 62% · a signal 38% |
|
| XApin 2 | Connected to: Signal 92% |
|
| XBpin 3 | Connected to: Signal 69% · not connected 31% |
|
| SCLpin 4 | Connected to: The microcontroller 46%, a connector 38% · not connected 15% |
|
| SDApin 5 | Connected to: The microcontroller 46%, a connector 38% · not connected 15% |
|
| VDDOpin 7 | Connected to: 3.3V 54% · a signal 38% |
|
| GNDpin 8 | Connected to: GND 77% · not connected 15% | — |
| CLK0pin 10 | Connected to: Signal 92% |
|
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include RFBitBanger by profdc9, VNA by profdc9, Adafruit Si5351A by kholia and MSI001 by ATmega8.
The SI5351A in open source designs
The gallery holds 19 open source boards using the SI5351A from 14 GitHub repositories; a typical one measures about 99 × 85 mm and carries around 92 components.
74% are two-layer designs, the rest use four layers or more, and 16% carry an open source license.
The most starred is RFBitBangSMT by profdc9.
Parts used alongside the SI5351A
Microcontrollers on boards using the SI5351A
What boards using the SI5351A are built for
SI5351A: common questions
Where can I find a SI5351A reference design?
Each of the 19 boards on this page is a real design using the SI5351A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the SI5351A VDD pin?
The VDD pin has a decoupling capacitor on 10 of 13 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 13 open source designs using the SI5351A.
What decoupling capacitors do designs use on the SI5351A VDDO pin?
The VDDO pin has a decoupling capacitor on 10 of 13 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 13 open source designs using the SI5351A.
How is the SI5351A XA pin connected?
The XA pin has a crystal on 9 of 13 designs, most often 25 MHz. Counted from the KiCad layouts of 13 open source designs using the SI5351A.
What parts are used alongside the SI5351A?
The ATmega328-PU, LM358 and SA612 appear in the most repositories here.
Which microcontrollers do boards using the SI5351A use?
Most are built on AVR/Arduino (5), STM32 (4) and PIC (1).
How big is a typical board using the SI5351A?
The median is 99 × 85 mm, and 74% are two-layer designs.
What is the most popular open source board using the SI5351A?
By GitHub stars, RFBitBangSMT by profdc9, with 221 stars.
Can I simulate one of these boards using the SI5351A before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.