Half life experience
NeonGuacamole08·half-life-experience·wk-1-PCB/Starbiee.kicad_pcb
About the Half life experience PCB
Half life experience is an open source ESP32 PCB design by NeonGuacamole08, published on GitHub. It is a 2-layer board measuring 70.5 × 69 mm, with 7 components from 6 distinct parts.
Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. Other key parts include the DHT11. By type, the board carries 2 ICs, 2 connectors, 2 switches and 1 resistor.
It belongs with the sensors designs in this gallery.
From the project
Me attempting to become a hardware expert in 10 weeks.com
I first downloaded the care package provided by Half-Life! Then I watched No. 3: Installing symbol libraries, footprints, and 3D step files in Kicad 9video by Electronicx on YouTube to figure out how to download the schematics and footprints file from the guide. I had absolutely no idea before I started this endeavor about how one makes a circuit, so this was a totally new world to me, and the guide was very useful.
Main components on the Half life experience
Half life experience bill of materials (BOM)
7 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-C3-SMD | Aosong_DHT11_5.5x12.0_P2.54mm | U1 |
| 1 | DHT11 | XIAO-ESP32-C6-DIP | U2 |
| 1 | Conn_01x04_Pin | Display_128x64_096_I2C | J1 |
| 1 | Conn_01x08_Pin | PinHeader_1x08_P2.54mm_Vertical | J2 |
| 2 | SW_Push | SW_Cherry_MX_1.00u_PCB | SW1, SW2 |
| 1 | 10k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
Half life experience design files
The KiCad project lives in the NeonGuacamole08/half-life-experience repository on GitHub; these links point at the commit this page was built from.
- Layoutwk-1-PCB/Starbiee.kicad_pcb
- Schematicwk-1-PCB/Starbiee.kicad_sch
Half life experience: common questions
What microcontroller does the Half life experience use?
The Half life experience is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.
How big is the Half life experience PCB?
The Half life experience measures 70.5 × 69 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Half life experience?
7 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the Half life experience design files?
From the NeonGuacamole08/half-life-experience repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Half life experience design in my own project?
The repository has no license, so all rights stay with NeonGuacamole08. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Half life experience without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k