HardLabs

Riotee ProbeHardware

NessieCircuits·Riotee_ProbeHardware·kicad/riotee-probe.kicad_pcb

Riotee ProbeHardware PCB layout, top view — open source RP2040/RP2350 board by NessieCircuits

About the Riotee ProbeHardware PCB

Riotee ProbeHardware is an open source RP2040/RP2350 PCB design by NessieCircuits, published on GitHub under the CERN-OHL-W-2.0 license. It is a 4-layer board measuring 43.2 × 22.9 mm, with 69 components from 21 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the W25Q16JVUXIQ, 74LVC2T45GT,115, TPS71721DCK, TLV73333PDBV and TS5A3166YZP. By type, the board carries 28 capacitors, 27 resistors, 9 ICs, 2 connectors, 2 diodes and 1 crystal.

From the project

The Riotee probe lets you program a Riotee module that is soldered onto your PCB or plugged into a breadboard. It has a standard 10-pin 0.1" connector compatible with the popular Tag-Connect cables that allow in-circuit debugging with a very small footprint.

The Riotee probe lets you program a Riotee module that is soldered onto your PCB or plugged into a breadboard. It has a standard 10-pin 0.1" connector compatible with the popular Tag-Connect cables that allow in-circuit debugging with a very small footprint.

Latest design files: - Schematics - Layout - Assembly plan - 3D rendering - Gerber - BOM

Specification: - Custom debug probe for in-circuit programming/debugging of Riotee modules - USB-C connector for connection to a PC - Raspberry Pi RP2040 controller handles programming/debugging - CMSIS-DAP compatible: Supports programming of the…

Riotee ProbeHardware, from the project README
From the project README

Main components on the Riotee ProbeHardware

RP2040W25Q16JVUXIQ74LVC2T45GT,115TPS71721DCKTLV73333PDBVTS5A3166YZP

Riotee ProbeHardware bill of materials (BOM)

69 components, 21 distinct parts.

QtyPartRefs
1
RP2040
U1
1
W25Q16JVUXIQ
U2
4
74LVC2T45GT,115
74LVC2T45GT
U3, U4, U5, U6
1
TPS71721DCK
U7
1
TLV73333PDBV
U8
1
TS5A3166YZP
U9
1
RH100-12.000-18-2030-TR
Crystal_GND24
Y1
1
12402012E212A
J1
1
AWHW 10G-SMD
Conn_02x05_Odd_Even
J3
1
QBLP595-AG1
LED
D1
1
RB521S30T1G
D_Schottky
D2
2
04025A120JAT2A
12p
C1, C2
19
CL05A104KA5NNNC
0.1u
C3, C4, C6, C8, C9, C10, C11, C12 +11
6
CL05A475MP5NRNC
4.7u
C5, C7, C23, C24, C26, C27
1
DNP
C25
2
WR04X1001FTL
1k
R1, R4
2
CR0402-FX-27R0GLF
27R
R2, R3
1
DNP
R5
4
CR0402-FX-1200GLF
120R
R6, R8, R18, R19
8
CR0402-FX-5101GLF
5.1k
R7, R9, R16, R17, R22, R25, R26, R27
Show 1 more
QtyPartRefs
10
RMCF0402FT12R0
12R
R10, R11, R12, R13, R14, R15, R20, R21 +2

Riotee ProbeHardware design files

The KiCad project lives in the NessieCircuits/Riotee_ProbeHardware repository on GitHub; these links point at the commit this page was built from.

Riotee ProbeHardware: common questions

What microcontroller does the Riotee ProbeHardware use?

The Riotee ProbeHardware is built around the RP2040, from the RP2040/RP2350 family.

How big is the Riotee ProbeHardware PCB?

The Riotee ProbeHardware measures 43.2 × 22.9 mm, has 4 copper layers and is 1.64 mm thick.

How many components are on the Riotee ProbeHardware?

69 components, from 21 distinct parts. The full bill of materials is listed on this page.

Where can I download the Riotee ProbeHardware design files?

From the NessieCircuits/Riotee_ProbeHardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Riotee ProbeHardware design in my own project?

Yes, under the terms of its CERN-OHL-W-2.0 license, which NessieCircuits chose for the repository.

Can I test firmware for the Riotee ProbeHardware without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards