Stomp breakout
About the Stomp breakout
Stomp breakout is an open source PCB design by Network-Direction, published on GitHub. It is a 2-layer board measuring 29.3 × 25.8 mm, with 6 components from 6 distinct parts.
By type, the board carries 3 connectors, 1 switch, 1 diode and 1 resistor.
It belongs with the audio and dev boards & breakouts designs in this gallery.
From the project
Guitar pedal schematics and resources
A PCB that allows a stomp switch to be soldered, automatically handling wiring.
Input and output jacks, as well as power are connected to the breakout.
Includes an option for a resistor and LED to show when the pedal is in bypass mode.
Schematic and PCB designed, but not yet tested.
Stomp breakout bill of materials (BOM)
6 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | In | PinHeader_1x02_P2.54mm_Horizontal | J1 |
| 1 | Out | PinHeader_1x02_P2.54mm_Horizontal | J2 |
| 1 | PCB | PinHeader_1x04_P2.54mm_Horizontal | J3 |
| 1 | SW_3PDT | 3PDT Stomp Switch | SW1 |
| 1 | 1N4742 LED | LED_D5.0mm | D1 |
| 1 | 10K 360 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
Stomp breakout design files
The KiCad project lives in the Network-Direction/Audio-Effect-Pedals repository on GitHub; these links point at the commit this page was built from.
Stomp breakout: common questions
How big is the Stomp breakout?
The Stomp breakout measures 29.3 × 25.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Stomp breakout?
6 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Stomp breakout design files?
From the Network-Direction/Audio-Effect-Pedals repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Stomp breakout design in my own project?
The repository has no license, so all rights stay with Network-Direction. Use it as a reference, and ask the author before reusing the design.
More boards in Audio-Effect-Pedals
BD2 Mods
51 × 61.3 mm67 parts2LNo license0
Distortion
53.3 × 47.5 mm50 parts2LNo license0
Big Muff Pi
44.5 × 55.3 mm49 parts2LNo license0
Rat
46.7 × 37.7 mm37 parts2LNo license0
Power Delivery
69.9 × 32.8 mm31 parts2LNo license0
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
88 Pin Vag Breakout
142 × 58 mm91 parts2LGPL-3.01.2k