Power Delivery
About the Power Delivery PCB
Power Delivery is an open source PCB design by Network-Direction, published on GitHub. It is a 2-layer board measuring 69.9 × 32.8 mm, with 31 components from 19 distinct parts.
Other key parts include the CYPD3177-24LQ. By type, the board carries 13 capacitors, 10 resistors, 5 connectors, 1 IC, 1 transistor and 1 diode.
It belongs with the audio and power & battery designs in this gallery.
From the project
Guitar pedal schematics and resources
A USB power system supplying 4x 9v outputs, up tp 2A or current.
Requires a USB-C charger capable of 9v/2A or better. A red LED turns on of there's an error negotiating power.
Main components on the Power Delivery
Power Delivery bill of materials (BOM)
31 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CYPD3177-24LQ | QFN-24-1EP_4x4mm_P0.5mm_EP2.75x2.75mm | U1 |
| 1 | IRF9358-TRPBF | IRF9358-TRPBF | Q2 |
| 1 | USB4125-GF-A | USB_C_Receptacle_GCT_USB4135-GF-A_6P_TopMnt_Horizontal | J1 |
| 1 | Out #3 | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Out #1 | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Out #2 | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | Out #4 | PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | LED | LED_D5.0mm | D1 |
| 1 | 3.3UF 3.3uF | CP_Radial_D4.0mm_P1.50mm | C1 |
| 2 | 470PF 470pf | C_Rect_L10.0mm_W3.0mm_P7.50mm_MKS4 | C2, C3 |
| 5 | 1UF 1uF | CP_Radial_D4.0mm_P1.50mm | C4, C5, C6, C8, C9 |
| 1 | 0.1UF 0.1uF | CP_Radial_D4.0mm_P1.50mm | C7 |
| 4 | 100UF 100uF | CP_Radial_D4.0mm_P1.50mm | C10, C11, C12, C13 |
| 1 | 4K7 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 2 | 1K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R7 |
| 2 | 2K4 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R10 |
| 1 | 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | 47K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
| 3 | 5K1 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6, R8, R9 |
Power Delivery design files
The KiCad project lives in the Network-Direction/Audio-Effect-Pedals repository on GitHub; these links point at the commit this page was built from.
Power Delivery: common questions
How big is the Power Delivery PCB?
The Power Delivery measures 69.9 × 32.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Power Delivery?
31 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Power Delivery design files?
From the Network-Direction/Audio-Effect-Pedals repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Power Delivery design in my own project?
The repository has no license, so all rights stay with Network-Direction. Use it as a reference, and ask the author before reusing the design.
More boards in Audio-Effect-Pedals
BD2 Mods
51 × 61.3 mm67 parts2LNo license0
Distortion
53.3 × 47.5 mm50 parts2LNo license0
Big Muff Pi
44.5 × 55.3 mm49 parts2LNo license0
Rat
46.7 × 37.7 mm37 parts2LNo license0
Stomp breakout
29.3 × 25.8 mm6 parts2LNo license0
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k
ControllerCurrentShuntAddOn
stuartpittaway
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k