Kicad example

nguyentrungthao·kicad_example·train1/train1.kicad_pcb

Kicad example PCB layout, top view — open source ESP32 board by nguyentrungthao

About the Kicad example PCB

Kicad example is an open source ESP32 PCB design by nguyentrungthao, published on GitHub. It is a 2-layer board measuring 120.9 × 119 mm, with 126 components from 47 distinct parts.

Its main chip is the ESP32-WROOM-32E, from the ESP32 family. Other key parts include the RTC_DS3231M, XL1509-5.0E1, AMS1117-3.3, PCF8574/SOIC-16W and ACS712ELCTR-20A-T/SOIC-8. By type, the board carries 35 resistors, 33 capacitors, 12 LEDs, 11 ICs, 7 diodes and 6 transistors.

It belongs with the power & battery designs in this gallery.

From the project

- Kiến thức cơ bản về điện tử: Playlist YouTube - Kiến thức về các chuẩn giao tiếp của MCU: I2C, SPI, UART - Kiến thức về nguồn: - Mạch lọc EMI: Video YouTube - Nguồn (Switching Power Supply): Video YouTube - Nguồn xung Buck (Buck Converter): Video YouTube

- Kiến thức cơ bản về điện tử: Playlist YouTube - Kiến thức về các chuẩn giao tiếp của MCU: I2C, SPI, UART - Kiến thức về nguồn: - Mạch lọc EMI: Video YouTube - Nguồn (Switching Power Supply): Video YouTube - Nguồn xung Buck (Buck Converter): Video YouTube

- Tìm footprint + hoặc + - Tìm 3D + hoặc +

- Video add thư viện: Hướng dẫn cài thư viện - video tìm add thư viện ngoài Tải thư viện ngoài - phút 12 - Thư viện cũ của LAB: IoTVision - Thư viện riêng của Tác giả KicadLIB --- #### Schematic

Kicad example, from the project README
From the project README

Main components on the Kicad example

RTC_DS3231MXL1509-5.0E1AMS1117-3.3PCF8574/SOIC-16WACS712ELCTR-20A-T/SOIC-8EL357N-G/SOP-4ESP32-WROOM-32E

Kicad example bill of materials (BOM)

126 components, 47 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RTC_DS3231M
IC1
1
RTC_DS3231M
IC2
1
XL1509-5.0E1
U1
1
AMS1117-3.3
U2
1
PCF8574/SOIC-16W
U3
1
ACS712ELCTR-20A-T/SOIC-8
U4
4
EL357N-G/SOP-4
U5, U6, U8, U9
1
ESP32-WROOM-32E
U10
5
SI2300/SOT23-3
Q1, Q2, Q3, Q4, Q5
1
SI2301/SOT23-3
Q6
1
DC5521/2.1MM
DC5521/2.1mm
J1
2
USB_A_Stacked
J2, J4
1
HB9500-6P
J3
1
HEADER-2.54MM-7P
header-2.54mm-7p
J5
1
MISD-PP-9P-V1
MiSD-PP-9P-V1
J6
1
CR1220
BT1
1
Buzzer
BZ1
1
300MA/250VAC
300mA/250VAC
F1
1
0.9-1.2A/1812/24V
F2
1
10MH/UU9.8
10mH/UU9.8
FL1
Show 27 more
QtyPartRefs
1
HLK-10M05
PS1
4
G5NB-1A-E_DC5
RL1, RL2, RL3, RL4
1
10D561
RV1
2
TACTILESW/4.2X3.3
tactileSW/4.2x3.3
SW1, SW2
2
3.3V/SOD-123
Z1, Z2
12
RED/0603
LE1, LE2, LE3, LE4, LE5, LE6, LE7, LE8 +4
1
SS54/SMA
D2
1
1N4148/SOD323
D3
1
BAT54C/SOT23-3
D4
4
1N4007/SOD-123
D5, D6, D7, D8
1
68uH 2A/10.4x10.4
L1
2
0.1UF/275VAC
0.1uF/275VAC
C1, C3
2
10NF/1000V
10nF/1000V
C2, C4
1
220UF/6.3X7.7/6.3V
220uF/6.3x7.7/6.3V
C5
6
10UF/0603/6.3V
10uF/0603/6.3V
C6, C9, C11, C25, C32, C33
12
100NF/0603/50V
100nF/0603/50V
C7, C8, C15, C17, C19, C21, C22, C23 +4
7
1UF/0603/50V
1uF/0603/50V
C10, C12, C13, C14, C16, C18, C20
2
LM7805CT
10uF/0603/6.3V
C26, C29
1
10NF/0603/50V
10nF/0603/50V
C31
13
1K/0603/5%
R1, R4, R6, R8, R9, R11, R13, R15 +5
2
100K/0603/5%
R2, R7
11
10K/0603/5%
R3, R10, R12, R14, R16, R18, R23, R28 +3
4
200R/0603/5%
R5, R17, R20, R27
1
4.7K/0603/1%
R22
2
4.7K/0603/5%
R32, R33
1
10K
R37
1
20K
R38

Kicad example design files

The KiCad project lives in the nguyentrungthao/kicad_example repository on GitHub; these links point at the commit this page was built from.

Kicad example: common questions

What microcontroller does the Kicad example use?

The Kicad example is built around the ESP32-WROOM-32E, from the ESP32 family.

How big is the Kicad example PCB?

The Kicad example measures 120.9 × 119 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Kicad example?

126 components, from 47 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Kicad example design files?

From the nguyentrungthao/kicad_example repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Kicad example design in my own project?

The repository has no license, so all rights stay with nguyentrungthao. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Kicad example without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards