3 open source boards using the 4003APG120
Real designs built with the 4003APG120, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Interf u
circuitly
115.6 × 108.2 mm23 parts2LNo license0Interf u
claynicholson
115.6 × 108.2 mm23 parts2LMIT102Interf u
nickradfc
115.6 × 108.2 mm23 parts2LNo license0
The 4003APG120 in open source designs
The gallery holds 3 open source boards using the 4003APG120 from 3 GitHub repositories; a typical one measures about 115.6 × 108.2 mm and carries around 23 components.
100% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is Interf u by claynicholson.
4003APG120: common questions
Where can I find a 4003APG120 reference design?
Each of the 3 boards on this page is a real design using the 4003APG120. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the 4003APG120?
The 628128, 74LS245, 74LS541, 74LS688 and EP600 appear in the most repositories here.
How big is a typical board using the 4003APG120?
The median is 115.6 × 108.2 mm, and 100% are two-layer designs.
What is the most popular open source board using the 4003APG120?
By GitHub stars, Interf u by claynicholson, with 102 stars.
Can I simulate one of these boards using the 4003APG120 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.