4-Bit-Binary-Adder
Nikhil-Misal-24·4-Bit-Binary-Adder-PCB
About the 4-Bit-Binary-Adder PCB
4-Bit-Binary-Adder is an open source PCB design by Nikhil-Misal-24, published on GitHub. It is a 2-layer board measuring 110.5 × 82.8 mm, with 55 components from 12 distinct parts.
Other key parts include the 74HC86, 74HC08 and 74HC32. By type, the board carries 21 resistors, 13 diodes, 9 switches, 5 ICs, 5 capacitors and 1 connector.
It belongs with the power & battery designs in this gallery.
From the project
Design of a 4-bit binary adder PCB using 74HC86 XOR, 74HC08 AND, and 74HC32 OR ICs, featuring switch-based inputs, LED outputs, and a regulated 5V DC power supply. Designed using KiCad.
A through-hole, discrete-logic 4-bit ripple-carry adder built from 74HC86 (XOR), 74HC08 (AND) and 74HC32 (OR) ICs, with push-button inputs, LED indicators and a PCB designed in KiCad.
1. Introduction 2. Project Overview 3. Key Features 4. Objectives and Learning Outcomes 5. Working Principle of a 4-Bit Binary Adder 6. Boolean Expressions and Logic Equations 7. Circuit Architecture and Block Diagram 8. Hardware Components 9. Input and Output Explanation 10. Circuit Operation: Worked Example 11. Expected Output and Verification Test Cases 12. Power Supply Requirements and Safety Precautions…
Main components on the 4-Bit-Binary-Adder
4-Bit-Binary-Adder bill of materials (BOM)
55 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 74HC86 | DIP-14_W10.16mm | U1, U2 |
| 2 | 74HC08 | DIP-14_W10.16mm | U3, U4 |
| 1 | 74HC32 | DIP-14_W10.16mm | U5 |
| 1 | Barrel_Jack_Switch | BarrelJack_Kycon_KLDX-0202-xC_Horizontal | J1 |
| 1 | Fuse_Small | Fuse_Littelfuse_395Series | F1 |
| 1 | SW_Push_Open | SW_DIP_SPSTx01_Slide_6.7x4.1mm_W7.62mm_P2.54mm_LowProfile | SW1 |
| 1 | SW_Push_DPDT | SW_Push_2P2T_Toggle_CK_PVA2OAH5xxxxxxV2 | SW2 |
| 7 | SW_Push_DPDT | SW_Push_2P2T_Toggle_CK_PVA2xxH3xxxxxxV2 | SW3, SW4, SW5, SW6, SW7, SW8, SW9 |
| 13 | LED | LED_D4.0mm | D1, D2, D3, D4, D5, D6, D7, D8 +5 |
| 5 | 100 nF | C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C2, C3, C4, C5 |
| 13 | 220 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R4, R6, R8, R10, R12, R14, R16 +5 |
| 8 | 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R3, R5, R7, R9, R11, R13, R15 |
4-Bit-Binary-Adder design files
The KiCad project lives in the Nikhil-Misal-24/4-Bit-Binary-Adder-PCB repository on GitHub; these links point at the commit this page was built from.
- Layout4-Bit_Adder_Circuit.kicad_pcb
- Schematic4-Bit_Adder_Circuit.kicad_sch
4-Bit-Binary-Adder: common questions
How big is the 4-Bit-Binary-Adder PCB?
The 4-Bit-Binary-Adder measures 110.5 × 82.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 4-Bit-Binary-Adder?
55 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the 4-Bit-Binary-Adder design files?
From the Nikhil-Misal-24/4-Bit-Binary-Adder-PCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the 4-Bit-Binary-Adder design in my own project?
The repository has no license, so all rights stay with Nikhil-Misal-24. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k