Airspeed prototype
About the Airspeed prototype PCB
Airspeed prototype is an open source ESP32 PCB design by nikitaignatov, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 31.5 × 51.8 mm, with 6 components from 6 distinct parts.
Its main chip is the ESP32-DevKitC, from the ESP32 family. By type, the board carries 3 connectors, 2 resistors and 1 IC.
It belongs with the sensors designs in this gallery.
From the project
this repo contains all pcb and schematics for velometa
Main components on the Airspeed prototype
Airspeed prototype bill of materials (BOM)
6 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-DevKitC | ESP32-DevKitC | U1 |
| 1 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | Conn_01x06_Pin | PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | Conn_01x08_Pin | PinHeader_1x08_P2.54mm_Vertical | J4 |
| 1 | 4k7 | R_0805_2012Metric | R1 |
| 1 | 10k | R_0805_2012Metric | R2 |
Airspeed prototype design files
The KiCad project lives in the nikitaignatov/velometa-pcb repository on GitHub; these links point at the commit this page was built from.
Airspeed prototype: common questions
What microcontroller does the Airspeed prototype use?
The Airspeed prototype is built around the ESP32-DevKitC, from the ESP32 family.
How big is the Airspeed prototype PCB?
The Airspeed prototype measures 31.5 × 51.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Airspeed prototype?
6 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the Airspeed prototype design files?
From the nikitaignatov/velometa-pcb repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Airspeed prototype design in my own project?
Yes, under the terms of its GPL-3.0 license, which nikitaignatov chose for the repository.
Can I test firmware for the Airspeed prototype without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in velometa-pcb
Similar boards
ESP32Open Book Abridged Edition
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1k
ESP32Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0k
ESP32Esp32 minimal
36.2 × 26.8 mm20 parts2LMIT4.0k
ESP32Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k
ESP32Controller
29 × 74 mm58 parts4LApache-2.03.8k
ESP32Bitaxe
skot
56.5 × 99.8 mm86 parts4LCERN-OHL-S-2.01.4k