HardLabs

Velometa screen

nikitaignatov·velometa-pcb·velometa-screen/velometa-screen.kicad_pcb

Velometa screen PCB layout, top view — open source ESP32 board by nikitaignatov
Simulate this board

About the Velometa screen PCB

Velometa screen is an open source ESP32 PCB design by nikitaignatov, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 13.1 × 14.6 mm, with 4 components from 4 distinct parts.

Its main chip is the ESP32-S3-WROOM-2, from the ESP32 family. By type, the board carries 1 IC, 1 switch, 1 capacitor and 1 resistor.

It belongs with the sensors designs in this gallery.

From the project

this repo contains all pcb and schematics for velometa

Main components on the Velometa screen

ESP32-S3-WROOM-2

Velometa screen bill of materials (BOM)

4 components, 4 distinct parts.

QtyPartRefs
1
ESP32-S3-WROOM-2
U1
1
SW_Push
SW1
1
C
C1
1
R
R1

Velometa screen design files

The KiCad project lives in the nikitaignatov/velometa-pcb repository on GitHub; these links point at the commit this page was built from.

Velometa screen: common questions

What microcontroller does the Velometa screen use?

The Velometa screen is built around the ESP32-S3-WROOM-2, from the ESP32 family.

How big is the Velometa screen PCB?

The Velometa screen measures 13.1 × 14.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Velometa screen?

4 components, from 4 distinct parts. The full bill of materials is listed on this page.

Where can I download the Velometa screen design files?

From the nikitaignatov/velometa-pcb repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Velometa screen design in my own project?

Yes, under the terms of its GPL-3.0 license, which nikitaignatov chose for the repository.

Can I test firmware for the Velometa screen without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in velometa-pcb

Similar boards