Esp32shield
niliha·ravelights-hardware·level-shifter-shield/esp32shield.kicad_pcb
About the Esp32shield PCB
Esp32shield is an open source PCB design by niliha, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 83 × 71 mm, with 52 components from 13 distinct parts.
Other key parts include the LM7805 and IXDD604PI. By type, the board carries 16 resistors, 12 connectors, 10 capacitors, 8 diodes, 5 ICs and 1 jumper.
From the project
PCB designs for driving light fixtures like WS28XX LED strips or light bulbs
A shield for the ESP32-DevKitC allowing 3.3V to 5V/12V level shifting of 8 outputs, allowing to drive WS28XX LEDs at a distance of up to 50 meters.
Main components on the Esp32shield
Esp32shield bill of materials (BOM)
52 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM7805 | TO-220-3_Vertical | U1 |
| 4 | IXDD604PI | DIP-8_W7.62mm_Socket | U2, U3, U4, U5 |
| 4 | Power_Terminal | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1, J3, J5, J8 |
| 2 | Conn_01x19_Pin | PinHeader_1x19_P2.54mm_Vertical | J2, J7 |
| 2 | Conn_01x19_Socket | PinSocket_1x19_P2.54mm_Vertical | J4, J6 |
| 4 | Screw_Terminal_01x02 | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J9, J10, J11, J12 |
| 1 | Jumper_2_Open | PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 8 | RED | LED_D3.0mm | D1, D2, D3, D4, D5, D6, D7, D8 |
| 1 | 0.33uF | C_Disc_D3.0mm_W1.6mm_P2.50mm | C1 |
| 5 | 0.1uF | C_Disc_D3.0mm_W1.6mm_P2.50mm | C2, C3, C4, C5, C6 |
| 4 | 10uF | C_Disc_D4.7mm_W2.5mm_P5.00mm | C7, C8, C9, C10 |
| 8 | 33R | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R1, R2, R3, R4, R5, R6, R7, R8 |
| 8 | 1kR | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R9, R10, R11, R12, R13, R14, R15, R16 |
Esp32shield design files
The KiCad project lives in the niliha/ravelights-hardware repository on GitHub; these links point at the commit this page was built from.
Esp32shield: common questions
How big is the Esp32shield PCB?
The Esp32shield measures 83 × 71 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Esp32shield?
52 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Esp32shield design files?
From the niliha/ravelights-hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Esp32shield design in my own project?
Yes, under the terms of its GPL-3.0 license, which niliha chose for the repository.
More boards in ravelights-hardware
Pwm dc dimmer
niliha
61 × 125.5 mm69 parts2LGPL-3.01Leading edge ac dimmer
niliha
54 × 96 mm57 parts2LGPL-3.01Ac dimmer
niliha
50 × 36 mm22 parts2LGPL-3.01Leading edge ac dimmer.bak
niliha
47.6 × 30.5 mm21 parts2LGPL-3.01Signal booster
niliha
18.8 × 18.8 mm19 parts2LGPL-3.01Spi port expander
niliha
35 × 43 mm12 parts2LGPL-3.01